Search results for query: *

I need to remove the pinion yoke on "Ole Blue" to Up Grade to larger U Joints. As you know, the pinion nut has a minimum torque of 240 ft lb. I had no way to hold and keep the pinion from turning. So, I hit the scrap pile again. One piece of 3/8" thick plate steel and one piece of 24" long 3/4"...

Del, Here is the you tube link: Link to blog: Home - Rescatando Chatarra It is in Spanish and you will have to use a translator program for english. All the measurements are metric. I used an online converter to get them to U.S.

I will get You links later today or tomorrow.

Hey Del, here are a couple of photos of my "Home-Brewed" Pan Brake. I built this from scrap and spare parts last winter. With all the "fingers" in place it is 38". It has 1 - 12", 1 - 8", 1 - 6", 2 - 4", and 1 - 2" fingers that can be used one at a time or combined. Works well. Herb aka...

I don't think so... LOL I actually built this to bend up a new "Home-Brewed" oil pan for one of my Darts called "Home-Brewed".

I have wanted a Box,Pan,Finger Brake since I was a young man. I will soon be 75. I was always to broke or cheap to plunk down the money to buy one. When I need to bend something I would "Improvise" or drive to a friends and use his brake. Over the years I have watched countless Youtube videos...

This is a project that has been in the back of my mind for FAR too long. I finally got it finished. I made this out of drilled and slotted aluminum angle. No more jack stands sitting on the floor along the wall.

I have R 19 in the walls, floor, and ceiling. Before I had everything insulated and the sheeting installed, you could not stand to be up there. Not it is comfortable.

Thank You. I forgot to mention, a great deal of the material that I have used is recycled from a couple of old structures that I have torn down and salvaged. Also I have done most all the work by myself with help from my Wife and spl440 from time to time. Herb

Over the past five years I have been slowly working on my "Man Cave" and Ham Shack". It all started out With me removing the support columns form under this I-Beam and then lowering the I-beam almost 8 feet. The columns and I-beam are 3/8" x 5 1/2" x 16". The columns are 15 feet tall. The...

Can anyone recommend a company or supplier that has quality air chucks and fittings. I am tired of the cheap, junk overseas crap that leak air all the time. Thanks, Herb

I can not say anything about the hand tools. But, I have bought two retractable measuring tapes (16 Ft and 30 Ft) after a sales person told me about the free lifetime replacement. I have now over the last three years broken and replaced at no cost, the 16 ft tape 3 times and the 30 ft...

Here are a couple of photos of the tool I made to measure/adjust the ride height on my 67 Darts. The tool is made of scrape that I had around the shop. I used a 1/8" x 1 1/2" x 16" piece of flat strap for the base. The uprigths are 1/4" black iron pipe spaced 13 7/8" center to center...

Here is a link to the Engine Start-up Stand that I built. http://www.bigblockdart.com/forum/showthread.php?21059-quot-Home-Brewed-quot-Engine-Start-up-Stand Herb