Search results for query: *

Hey guys Had all the GT trim of my 69 Dart Convertible, re-anodized by Bill Petrow who did the anodizing for such famous restored race cars such as "Maverick" the 64 Dodge etc. Met him at the Nats a few years ago and he had an impressive display of cars and restored parts. My issue is, on the...

Hey guys Does anyone repop the window stop rubber that goes in the top of the vent window frame and stops the window from going too high? 69 dart ht/vert

Had mine made at Carolina Custom Hot Rod Parts in Clinton N.C.. They kept the template drawing for their CNC. They were exactly what I wanted in everyway. Using my template, they should be able to turn you a pair out pdq. If you need more info, drop me a pm. Martin

Hey guys, I have mounted the bumper brackets and bumper on my 69 Dart. Its been 9 years since I have seen it together so Im not sure how much clearance there should be between the bumper and lower grille. Do you guys have any measurements on this? Also, any pics would be helpful. Thanks

Hey guys, Is anyone repoping the front bumper bracket to subframe bolts/hardened washers for an A body?

I agree, but my thought is not to raise the engine, but merely to lower the right side and only change the amount of level the engine has now. I have no exhaust on yet, so hopefully there will be no issues there. I have just now gotten an email from Mark Schumaker, and he does offer an engine...

That is an option, although it may put the body panel out of alignment some. I'll consider it. Thanks

Hey guys, Has anyone used a 6 pak on a small block with a bulge hood with success? I'm close to buttoning up the engine bay in my 69 Dart, and have a slight hood clearance issue to work thru. With a level on the carbs, the engine is in bubble, though the right side is just a tad higher and...

This is what I have been looking, I will get one on the way, Thanks again, Martin

Thanks for the information, I will purchase this set, Thanks again,

Thanks SSBA, I'll give it a shot

Hey guys, I'm putting the dash frame together on my 69 Dart Conv. The serial number plate is milky and faded. Is there any place that I can get a new overlay or send it to be restored. I would like it to look new. Martin

Hey guys, I am installing the left side view mirror on my dart. It is remote and the cable comes thru the top of the inner door as you may know. There is a ring that fits on the remote handle and I think it goes behind the upper inner door skin. My question is: this is a repo mirror and the...

Hey guys, I need to order some glass setting tape, that goes between the glass and the trim,but I'm not sure how thick it needs to be. Too thin and the glass moves in the trim, too thick and you may bend or break the trim going over the glass. I didn't save any when I disassembled the glass...

You the man Sedan, you guys make my lack of memory feel better Martin

Thanks Bomber, Much appreciated Martin

Hey guys, I bought some windshield rubber may years ago and for the life of me I can't remember if it was for my 69, 70, or 72 Darts that I have owned in the past. The part number is 3767240. Any help would be appreciated. If it won't fit anything I have now, I'll post it for sale.

Thanks Darren, I'll give them a call in the morning. Martin

Hey guys, I have a 69 Dart and need to know what type of plating does the gas tank filler neck have? I need to send mine to someone to have it plated, but not sure what the process is. Also who do you recommend to do this?

Thanks guys, You've been a big help Martin

Hey guys, Did all 1969 factory AC Darts come with tinted glass or was it just hit and miss?

Hey guys, I am in need of ALL the glass for my 69 Dart Convertible, less the back glass ( it came with the top). I would like NOS or Reproduction only. Maybe far stretched, but I'd also like to purchase all from one supplier if possible, if not I'll adjust as needed. I have contacted Vintage...

Thanks 440 abody, Martin

Hey guys, Who makes the most complete exterior trim screw set for a 69 Dart Conv. The tail light bezel screws are machine thread and appear to be hard to find, and I need all the screws anyway. Thanks for your help, Martin

I've never done one either, I was also not sure about the rivets, so I sent mine to [email protected] He does wiper motors for Tonys parts and others, so I gave him a try. It went out today and he said about 3 week backlog.

Thanks Rbob, Thats a big help. I'll ge started today. Martin

Hey guys and gals, Not sure if this is the correct forum topic, but here goes.... What would be the correct colors to paint the wiper motor on a 69 Dart? It has a cermamic resister bolted to it, that I assume should be natural in color. Also, where can I purchase the rubber mounting bushings...

Hey guys, Who makes the best quality repo glass for a 69 Dart Conv.. I need all the glass for it. Thanks, Martin

Hey guys, I want to purchase a stainless engine bay bolt kit for my 69 Dart. Can any one tell me where to buy it? Thanks FABO, Martin

Hey guys, Does anyone reproduce the rear outer wheel well housings for 67-76 Darts? I would rather use new stuff if it can be had. I have found 1 NOS housing for high dollar if I have to, If not I guess I would take NICE used parts. Thanks, Martin