Search results for query: *

I need a 4 speed shift handle for my 70' Dart non-console with a bench seat. I was told by Wayne from Brewers Performance that 68'-74' only with bench seat will fit. Let me know what ya got with pics and price. Thanks....

I'm looking for a hurst shifter mechanism, shift mech. mounting plate (I believe its a hurst part #6350), shifter handle ((bench seat))and rods. All parts for an A Body. I am installing the 4 speed in my 70' Dart with a "bench seat". If ya got any of these parts ya can part with please PM me...

Yes i got the trans., BB bell, clutch/brake pedals, Z-bar but I'm still looking for the shift rods, shifter, shifter mount and any other misc. parts needed to complete my set-up. They have to be for an "A Body". Please pm me with what ya got with prices. Thanks Dave

Man thats real close to my price range but i'm not to sure about that road trip if your in Tennessee lol. I appreciate the response and i'm gonna hold tight for a little to see if anything pops closer to Pa. We have bought them setups a little cheaper up here, the problem is they aren't as...

Hey guys Im still searching for an A Body (Non Overdrive) A833 4 speed and all the parts for an install. I need it to fit a 70' dart. My car is a BB (440). I need transmission, clutch/brake pedal assembly, Z-bar, shift rods, shifter, shifter mount, bell housing for 440 and anything in between. I...

I need a 4-speed setup for a 70' dart. I have a 440 motor out of a 72' Imperial. I am looking for a complete setup from the transmission/bell housing to the pedal assembly and all the parts in between needed for assembly. I am willing to travel if you have enough parts at a good price. Let me...

Im looking for a steering column for my 1970 Dart. Im installing a 4-speed in the car and my column is automatic. The car also does not have power steering. I live in Irwin Pa. 15642. Any help will be greatly appreciated. Thanks Dave I also may need the transmission...

Im looking for a pair of stock valve pans to fit 72' 440 engine. Im trying an experiment with them so im looking to pick a pair up for as little as possible. Im going to etch them with the Mopar Performance Logo and if all goes well it will be an engine compartment addition that will look...

I'm looking for a go wing for a 1970 Dodge Dart. I need all the mounting brackets also. I'm in Irwin Pa. 15642. Thanks

I have a 70' but I'm pretty sure it is different from a 72'. I know the side marker lights are different and I think but not sure about the front fender extensions. I'm in southwest Pa.

I have a couple but they both have a pin missing off the back. I ordered a new one from Yearone ($45.84 with shipping) but it's on back order and they won't have them until the end of May at the earliest and I also contacted Mopars By Crane, Paddock, Herbs auto parts, Laysons and a few other...

Thanks I'll check it out but just in case if anyone else has any ideas I'll be glad to hear them, Dave I called National Moparts with no luck, they can't get it I was told, Thanks again Dave

Hey guys does anyone have or know where I can purchase a "new" 1970 Dodge Dart hood emblem. I called all the vendors Yearone-Paddock-Herbs Parts-Laysons-Hardens-Mega Parts and more and they all told me they are on back order until around June of this year. I had a new one that the body shop...

Ya it's a good looking radio but for me that's a little high for an untested radio. I've already paid over $225 for two other radios that was both untested and both had something burned out inside. I took them to a repair shop and it would have cost me more than what I could have put a whole...

I'm looking for a AM/FM factory radio for my 70' Dart. Hopefully clean and in good working condition, if anyone has one laying around please e-mail me at [email protected]. I live in Irwin Pa. 15642. PLease send pictures and shipped price to my e-mail. Thanks 440nika if you need any...

I have a brand new set of Mopar Performance (black wrinkle) covers that I purchased at the Mopar Nationals and never installed them on the car. I had the original covers blasted and painted with the engine and preffered them over the Mopar Performance covers for my taste. I paid $125.00 and...

Hi, sorry for the late response but I don't get on the computer everyday. I'd sell both fenders for $250.00, if intrested send me your e-mail to [email protected] and I'll get you some pics sent over. Thanks Dave!!!!!!!!!!

I have a pair of fenders in Irwin Pa 15642. Not in bad shape but a little further than 2 hours. Let me know if all else fails!!!!! Dave

Hey guys, I'm looking to buy a set of HD rear leaf springs (prefer 6 leaf) for my 1970 Dart Swinger. My stock springs let the tires rub the body when driving the car and I drive over a bump in the road. I'm looking for a set of springs that will put my car body about an inch above the tire. I...

Hey Ben, This 440nika. First of all I fell and broke my hand so I haven't had the chance to check that turn signal switch yet that your helping me out with but more importantly I think I may have your windshield cord. I bought it new from Yearone along with a new windshield gasket and the gasket...

Thanks, I will be sure to test this first thing in the morning when I get to the garage. I'll let you know what I find out. Dave

Hi, Yes to all your questions!!!!!!!!!!!!!!!!!

Hey Guys, Does anyone have an extra rear wiring harness for a 70' Dart Swinger laying around. I previously posted a forum about my rear brakes and reverse lights not working. My pedal switch is good but I don't have any power at the rear lights. I followed my wiring harness towards the front and...

Hey John, check you local auto glass dealer. You might not only be surprised at what they can get but also the price. I live in Irwin Pa. and I bought a windshield for my 70' Dart for $129.00 and that was installed!!!!!!! Dave

Hey Ken, IF PAULRM IS NOT INTRESTED, Do you know if these springs will fit into a 70' Dart Swinger? Do they add any height to the rear of the car over stock springs? If so and they are still available how much are you asking and whats the easiest way to get them to Irwin Pa. 15642, Thanks Dave

Hi, I have a 70' Dart swinger 2 door and I bought all three cables for mine at my local Napa for a total of about $64.00. I got the one that runs from the e-brake handle to rearend and the left and right rear. Hope it helps!!!!

I sent you my name and address, I've done the same over the past couple weeks with members who were looking for small items, so I guess it's true what goes around comes around. The people on this web site all seem to be great and it would be cool to someday meet some of them. Thanks again...

SGBarracuda, Thanks alot. Do you want me to post my address here or e-mail it to you? It don't bother me either way. Dave!!!!!!!

Hey Guys, Does anyone have and old windshield wiper wiring harness with the electrical connector for a 2 speed wiper motor off a 70' Dart? Mine has a broken wire just as it goes into the connector from the wiring harness, if you got one I need the connector with about 6 inches or more of the...

Sorry for slow reply, I'm not on computer much. According to mapquest I'm 331 mile and about 6 hours from Matamoras Pa. 18336. If still intrested you can call me at (724) 217-5610. I also have allot of other parts for that 70' Dart because I bought everything new when I restored mine, Thanks...