Search results for query: *

I've never seen an interior bolt kit, not many bolts on the interior and generally hidden so being "correct" isn't a concern (although I try to keep it all OEM). What is it you need or need reference to? Alan

I used the black Organisol from OER and then sprayed the color over it. https://www.rosevillemoparts.com/product/black-textured-paint/ Alan

Not in any of the three years, in 68/69 it was part of the sport package (Sport Steering Wheel, Custom Sill Molding, Wood-Grain Instrument Panel) In 69 it was noted that you could get the Rallye Instrument Panel independently of package. In 67/68? Formula-S 1967: HP Engine (273-4 or 383), HD...

In 67 both the 120 and 150 had the trip, no 67 had no trip. The 150 was part of the Decor Group (woodgrain dash and door inserts, chrome pedal trim) Alan

I have an old soldering iron that I use for stuff like this, run it through from the bottom with the carpet in place. Alan

Although they may not have been required they were standard on the 67 Chrysler/Plymouth/Dodge lineup. Where the blop of sealant is on the tunnel and inside rocker. Alan

You may be able to find them cheaper but these were the ones that had the part number listed. Alan

Retainer: 2996704 Mopar 1970 A & B-body Steering Wheel Horn Pad / Button Mount P/N 2996704 | eBay Switch: 2822126 67 68 69 70 71 72 73 Dodge Plymouth Chrysler 2822126 Horn Switch Good Used | eBay Alan

My 69 Polara Convertible has one (mounted at about drivers knee) Fits 55 56 57 Imperial Convertible Courtesy lights NEW | eBay Alan

You will not find anything out about the original color other than Red. If the car had a red interior they would have been Red. These were molded in color. Colors didn't age well, not just fading but they tended to crumble faster. Black plastic interior pieces have held up far better than the...

As far as I know there never was a dome light on the fastbacks? Alan

These should do it. Alan

This might help, only picture I have. Alan

The Fastback courtesy light is part of the rear body harness, the left light socket is part of the harness, the right side plugs into the rear body harness near the left side light. Alan

https://www.autometaldirect.com/body-components-floor-seat-brackets-bucket-seat-floor-brackets-67-76-dodge-plymouth-a-body-p-4477.html

Reinforcement Plates. Alan

Also the floor pan has tick marks for the brackets. Alan

This book should show it. https://www.ebay.com/itm/362671663056 Alan

They are there if you look, there are even some used ones. Door Jamb Windlace For 67-74 Dart Duster Demon Valiant BLACK PAIR #63 | eBay 1967-1974 A-body BLACK Door Jamb Windlace FITS Dart Duster Demon Valiant | eBay Alan

I'm sure the only difference is the length, just cut to fit. Alan

This type is more properly pinchweld trim or edge trim. Either way, most people call it windlace. 1967-69 Mopar A-Body 2 Door Sedan Black Windlace | eBay Alan

An example, the 67 Valiant was cleaner, not a filled on like this. From a cursory scan of eBay.

I have seen 67 Valiant Signet dash bezels with no radio holes, the bezel was the "delete" panel, no extra panel. Did they do this on other cars or years, the parts books would probably show it. Alan

Better detail here... Auto Color Library - We will match ANY Car Paint Color! Alan

Here are the interior codes. Alan

You will need a different glovebox door to add the lock on a 67, it isn't just drill a hole. Alan

The paint chip pages have this information. Classic Library 1972 Dodge Alan

This is the only color that could be (E2Y3) It doesn't look like the white was available on the Scamp Alan

I think he is referring to the full rubber floors used on low end cars. Alan

67 Burl wood applique (I think 67 only) No OFF/LOW/HIGH on the fan switch (border is smaller than the heater controls) Round radio knobs Alan