Search results for query: *

I do have pictures in my manual. My rear end came out of a 69 Charger, I think. There is no blown up pictures. Anyway. Your picture names all the parts. The part I have left over is The parking brake lever. Now I see how it's installed.It connects to the back of brake shoe and that is where the...

I got a junk yard 8-1/4" rear end. Didn't have brake shoes and springs. My manuals don't have a exploded picture. If someone out there knows where I can get one to finish this job would be great. I did start installing the right side. I have 1 part left over. That's why I need the blown up...

It's a Ron Francis Bear Bones

Hi guys its been awhile. Still working on my Dart. She's almost ready. Trouble with turn signals.

Hi Im back. Dart is ready for paint. Dash is togather wipers work Dash light work. Blower motor works when the switch is turned on. Backed her out the other day and drove her around the complex. She turns left, right, forward, reverce, stop, go. Hope next week I can get her in the paint shop...

My dart came with a 3 speed motor. I have a 2 speed installed now. I was told it would work. I want the original 3 speed motor with the motor against the fire wall. Then with the oscilation of the motor drive are and the 2" connection bar. Maybe that will work. Nothing was connected under the...

Just preview of the seats

I'm tired of dealing with the old wires under the dash. I bought a system from Ron Francis. I took the dash out of the car. The wiring under will be run nice and neat. I wish I did this when I rebuilt my 78 Vette. Who knows maybe for it's 10 anniversary of it's last paint job. There's a few...

I have that piece. With that on everything binds and stops.. to much travel.

There is a picture the trailbeast posted that is the wiper motor I need. I have that 2" pcs. My wiper arms are way to long. Bought the wrong motor.

My dart was built in Canada and they put tons of undercoat on her. It was over a 1/2" and in some places more. I put the pressure cleaner to it. Got a lot off and was surprised to see absolutely nothing but the painted frame from the factory. Undercoat works.

Well I got the front seat repaired. Welded what needed to be welded. The prior owners must have had a big butt, because, driver seat was destroyed. This is it ready to upholster.

Havn't finished installing the dash yet. But, I did paint the inside of the trunk. It looks good. I've cleaned both door windows with a razor blade. Raped them up and put them in the ready room. Now I'm working on the interior. I'm going to try doing the upholstery myself. With the help of a...

Took my dash cluster out yesterday.Not having lights and gauges suck. I got all the other lights. But not a thing on the dash. In the first photo you can see where I cleaned the light contect. The second photo is after I cleaned everything. When I removed the gauges. Under the nuts where rusty...

It was a long day today. Finished block sanding the Dart. I couldn't make money doing this for a living. Tomorrow I'll wash her real good and prime her for the last time. The hard part is dedusting the shop. I hope to be able to move the Dart outside to sand before painting. I'll be using...

That's it heat and quench. As you can see in my previous pictures of both fenders. I used propane torch. I now have to rework the fenders by block sanding. AGAIN:banghead: But thats OK no more oil can fenders.:cheers::cheers:

Dart started right up. All running lights are working. Radio and four speakers working. Lights on the aftermarket gages work with the light switch. Got good oil pressure. Ran out of gas before the temp. gage could move. Don't know how/where to connect ther voltmeter. I'll figure that out...

Today, I ran all the wires for sound system, connected to the stereo. Ran power lines over to the fuse block. Tomorrow hook up tempery speckers and check out the sound. Good day today.:coffee2:

Today I fixed my oil can fenders. Both fenders same place both sides. Left fender had a bent there. When I popped it out that's when I got the oil can buckle. Anyway there gone. Put 1 coat mud and sanded then another skined coat. Tomorrow I'll sand again and prime. It's a lot smoother then it looks.

Still under the dash. Got power from the key to the starter. Lights, turn signals running lights. But no dash lights. I took a test light and I had power to the temp, fuel gages. The screws and nuts on the back of the circuit board. So I guess the circuit board is good. I grounded the column to...

As of right now, and all the things I've done to this car. I do beleave that putting the dash back together is the hardest job in this project. My hands and arms are all cut up. My back and knees hurt. Sometimes I get myself in possession under the dash and can't move to get out, without hitting...

I'll be waiting to hear from you on what your measurements are.:coffee2:

That looks like it would work. I bought mine on line. They did say it would even though it was different. The one in my car was like yours. I guess I'll have to buy one like yours. Thanks for the heads up.

Window is open.

Trouble with wiper drive arm. First photo drivers side wiper in park. Second photo passenger side in park. Third photo of motor w/drive arm going to motor. Next 2 photo's are of my drive arm. Center line to center line. For a total of 22-3/4". Last photo is of my drive arm connected to the to...

Update Connected the battery. Won't start with the key. Will start with hand trigger on the solenoid. Couldn't find my test light. Looked everywhere. It was at the house in the Vette.:banghead: Where would the best place to start. In the engine compartment and work my way into the cage under...

I Can't wait that long. One way or another I'll have one tomorrow. =\:-)>

Hi guys Just a update. Booster /master cylinder installed. I replaced both wheel cylinders. nothing is leaking. Dart is on wheels now. Dash insturments are in, battery is charged. Tomorrow turn wipers on and so motor will return to park. Connect the drive arm. Hope that project will be...

There is only one thing worst then to much hardener in bondo. I found out today, what that is. Not putting enough hardener in the mix.:banghead: What a mess removing it. I did get the back window panel and the 2 sails finished today.

Spent most of the day blocksanding. Chasing down the little rippels. I modify my brake booster bracket today and painted it. tomorrow i'll prime the master and install the system. Hope the have brakes when I'm finished. Will report progress next time. Ho, ho, ho!!