Search results for query: *

If your rad is rotted, then obviously fix that first. Clutch fan is another good idea, and do that next. If you can't find the proper shrould, you can always make your own. I tried to make a bunch of them work and they just didn't. I was told they would fit, then they would not. I...

Shane I wonder if that aluminum flex tubing for dryer vents would work. I've seen that smaller dia., about 2" or there abouts???? Try Rona or Home Depot??? Worth a shot. Jim

The Right Stuff is the right stuff. Any auto supply house should carry it. I'll never use a paper gasket again. Awsome product!

Have a reputable rad shop flush and solder the rad of any leaks. I paid $60.00. Flush block with stat out. Replace stat with 180*. I drilled a 1/8" hole on the flange so not to trap air. 50/50 antifreeze mix. RUN A SHROUD. Make one up if you have to. It will make a huge difference. I...

After 3 misfits, I made my own. 2" wide hoop...welded on 4 brackets...16 guage steel...painted it satin black. I'm really happy with it. With paint...around $20.00. Just make the hoop 1/2" larger in dia than the fan so you get 1/4" clearance all around. Then weld on the brackets so the...

Dave: You're the eternal optimist. You always give me the answer I want to hear. Thanks

Think my clutch is toast. I gave it a flick, and it went around about 1 full revolution. I thought it should only move 3 or 4 fan blades. Does it matter if it's checked hot or cold? Would a flex fan be a good replacement for it or would a clutch cool better at idle? Thanks

Thanks dgc It was rusted alright! I used an old sharp wood chisel between the pulley and fan flange and slowly spread it apart while turning it. This time it's getting anti sieze. Thanks again

Hey guys: Trying to install a shroud on my 340. Removed the 4 bolts that run through the flange of the clutch fan, which goes through the pulley, that attaches to the water pump. What else is holding it on?