NOS ACCEL 8300 high performance points and condenser sets got about 15 sets to sell. Can make package deal or sell separate.
$30 a set comes with felt
Located in East Palestine Ohio 44413
1973 440 Block Only with main caps, has been bored .030 over, Sonic cleaned new brass freeze plugs, and cam bearings installed. Ready for assembly
$1200 OBO WILL ARRANGE SHIP FASTENAL
Located in East Palestine Ohio 44413
Started life as a 73 400 Big Block 727. Was used for racing has racing clutches and Turbo Action Brake
Also has deep pan. It’s been sitting for a while may need a fresh look but was working and holding great when pulled.
$1000 OBO
Located in East Palestine Ohio
This is a very nice set of Big Block 16 Crane original ductile iron rockers with very little use. They still look almost new. These are hard to find like this! No shafts but I do have the springs bolts and spacers.
$350 OBO
Located in East Palestine Ohio
78 Cast 440 Block has been bored .030 over
Sonic cleaned new brass freeze plugs and cam bearings installed. Ready for assembly
Forged steel Crank is 10/10 and ready to go.
LY rods reconditioned with ARP bolts and has full floating pins. I don’t have pistons!
I will sell block rods or crank all...
I have a Dana 60 narrowed HOUSING ONLY
45 1/2 flange to flange outside. Has big bearing Mopar ends to except up to 40 spline axles. Was narrowed for a Duster with mini tubs.
$500
Located in East Palestine Ohio
I have a 505 started as a standard 440 now has Callies 4.25 crank Scat rods Diamond 11:1 pistons with 13CC dish. Trickflow 270 Heads currently has 1 bolt holding them on
Harland Sharp 1.6 roller rockers. Comp solid roller cam .678 lift @1.6 .264 .270@ 50 duration 108 LSA. Smith brothers 3/8 HD...
I have a 68 A body Hamtramck 23 spline 833 4 speed. It’s disassembled and cleaned was going to put back together but don’t have time. I bought a kit from Brewers with bearings. Tranny is complete not missing nothing!! I Will Ship at buyer expense
$500 OBO
Located in eastern Ohio
Up for sale is this 1969 factory 383 Dual Point distributor. This would have been for a 383 Automatic A body Dart or Barracuda. Part number
2875847 IBS 4016S 42 week of 1968. This has been completely restored to like new condition and factory spec for a 1969 Automatic on my Sun Machine...
I have a 1973 340 HP Distributor Auto or Manual
Part Number 3656771 Build Date 4th week of 73
Completely restored then curved to factory specs per manual on my machine.
This would have been on any 73 factory high performance 340 4 barrel and is set to exact specs.
$350
Located in eastern Ohio
I have a a Weiand 8007 dual plane intake for a 318/340/360 Has 1 inch adapter
$175 OBO
Edelbrock 1400 600CFM carb works good
$125 OBO
Located in Eastern Ohio
I have a 1968 automatic Dual point distributor. Completely restored new bushings NOS points and Condenser,correct curve and ran on Sun machine to set dwell for 68 specs.
$450
Located in Eastern Ohio