Search results for query: *

i have a 4.2 lever i snugged it up and backed off 1.5 turns ,cause thats what i read

just finished rebuilding my trans with cheetah valve body,no compression braking in first,when i snug up the adjuster for the front band the output shaft still turns,i want to do up the adjuster so i can hardly turn the shaft and then back off half turn ,should everything still turn whaen i snug...

just finished rebuilding my 727,it has a fully manualised cheetah valve body with no low gear braking,i was just wondering though because my instruction installation sheet with my valve body says if transmission is out of car remove the governer weights,what happens with this valve body if i...

because you asked so nicely i,ll do it after i soak the clutchs and reasemble thanks matty!!!!!!!!!

it seems like i,m within the high end of the parameters,i,ll just put in as is,thanks guys matty............

i have just reassemble my front clutch drum with 5 alto red frictions and 5 kolene steels,its put together dry and i have 0.115 clearance to snap ring,in carl munroes book he says about 0.015 per friction which means it should only be 0.075,will this be ok and what are the ramifications of...

look theres a whole stack of off the shelf converters that mancini sell,i live in australia,i just want to buy one online and have it shipped with my order,can someone just have a look and tell me what i need,the car will be 50% street car and 50% race car

how do i talk to mr cope ??

Hi guys,i am building a 451 lowdeck stroker to go into my 73 barracuda,the cam is comp cams extreme energy 285hl 241@ 50 247@ 50,manifold is m1 single plane,compression about 10;1,rear gears 4:10,trans is full manualised,ijust want to buy a off the shelf converter from mancini,they sell...

just placed a big order with mancini,bought a whole lotta stuff to ship back to australia,including a tci super streetfighter transmission,got on here last night and red so much negative and bad stuff about tci it scared the crap out of me,so i rang mancini and cancelled the tranny part of the...

hi guys, we pulled a 318 and 904 out of a 72 challenger and replaced it with a 340 and 727,pretty sure the 727 came out of a abody the problem is now the shifter wont line up,you can get 1st and not get park,you can get park but no first,it is a slapstick,is there any difference with...