Search results for query: *

67 barracuda my horn relay stuck on and got real hot burnt the wires going from relay to horn, and relay to alternator. Does anybody have these laying around I can buy, or tell me where to get them. I have a new relay on the way.

Help looking for a 1967-68 steering column reverse switch trip pin. pn 02883211 it activates the switch at the bottom of the column they slide to the side and can be removed. Thanks in advance.

I need the seal that goes on the front of the rear side glass behind the drivers and passenger door. Who sell thems?

Looking to upgrade my torsion bars on my 67 notch and thought Ide go with 1.03. Where would be a good place to get them and what kind?

Between now and spring I would like 1.6 rockers, 360 hyd lifters now, I would really like a complete set with pushrods, and anything I need to do the job, Whats available?

Can these be had new? Where? If not who has a good used on for drivers front window, I would need price, and shipping to McClure Pa 17841

Looking for a primo bolt on one for my 67 barracuda. Anyone have it and how much?

Looking for a pair of brake hubs for 10 inch front brakes with 5x4 bolt pattern. Shipping would be to central pa. Would probably fit in med one price box? Whats everyone got?

I need a brake switch bracket for a 67 barracuda. Whats everyone got?

I could use about 6 light bulb sockets for 194 bulbs that fit 1967 ply barracuda, pm me prices or post here.

New post I guess I need a 67 only antenna for my barracuda, it must be nice, whats anybody have?

I need the complete set up prefer 67 but will take 68-69 It must be very nice and not bent. Whats everyone got?

I just installed a radio antenna that leans slightly backward. I need a bezel and nut in good condition to make it straight Can anyone help out? This is for my 67 barracuda, its not original, Just so it looks decent and will work, thanks. Pms are ok.

Just what the add says, Anyone have a four way flasher switch for a 67 barracuda. Does anyone sell new ones? Also I have a 120 mph speedo and almost new cable I can sell or trade to someone. The cable is one year old, the speedometer is in good working condition and needs nothing but a new home.

Looking for a good set of roller rockers 1.6 ratio with pushrods and all the hard ware to convert my hyd lifter set up over. Also I plan to keep the hyd lifters is this feisable?

Looks like I need a replacement, I will consider 68-69 If thats all thats out there. Must be nice and working. Pm me please. By the way I need the one with trip. I got my old one working but I still want to up date to a 150 with trip.

Ive added power brakes on my car and would like to add a vacume pump with pressure regulator, anyone have one for sale?

1967 barracuda passinger side vent latch, and the stud or bolt it attaches to, driver quality fine.

I need the upper pivot for the drivers vent window, If there not too salty I may take a passanger side also. Whats everyone have and how much?

Looking for a complete set of 1.6 rockers to put in my 360, I want good used ones at a affordable price. Is that a possibility?

Any body no where I can get a couple clamps in chrome? There just the standard ubolt type clamp.

I have a 67 barracuda and I am in need of the lower trunk trim. I need a nice one with no dents. Anybody no where to buy a used or new one?

I posted this earlier Im looking for a 7 blade 18 inch fan that will accept clutch. PM me with what you have.

Im looking for a 17 1/2 18 inch 7 blade fan. It must be able to accept a clutch, not the bolt on whats everyone have, Im playing with something so I dont want a new one just a good serviceable one Pictures would be nice.

I could use the 5 blade fan with clutch, new or used anyobody have one for sale? 17 1/2 or 18 inch.

Im still looking for a pair of small block LA alluminum heads, They can be bare or ready to go. No junk please.

Anyone have a used pair of eddys they would like to donate or sale, Ive been looking for a pair of heads and if I dont go with alluminum I wont be satisified, So whats out there guys, show me.

Looking to buy a pair or alluminum heads, or X or J heads in working condition can anyone help Im located in central pa 17841. Must have 202s

I need a 32t speedometer gear with the long shaft, Someone that takes pay/pal please. Send me a price shipped to central Pa.

Im looking for the 4 hood to fender bumpers for 67 barracuda, anyone have them?