Search results for query: *

67 barracuda with a 360 auto, have been driving it for about 3 years with no problems, you could wind it up to 6500 with no problems but now it goes to 5000 and feels like valve float, just doesn't want to go further. Any sugestions?

Im kinda against Chinese stuff but again price sells. Any body no anything about these? Mopar Chrysler SB 318 340 360 160 Ratio Stainless Steel Roller Rocker Arm Set ( 171499171093 ) ebay 200.

If I put these rockers on my 360 engine do I need anything else to go with them? ebay number 261717461363 they are crane 1.6 Will they work with my stock shafts, and pushrods? Picture Information Image is loading...

I have a 360 La engine with Eddy heads, I want 1.6 rockers and pushrods what options do I have. What kinds do I get? Hyd lifters in engine.

I have a la 360 with hyd lifters and stock rockers. My question if I go to 1.6 what can I expect for my money? Is it worth it? Will it give the cam any more rpms or what exacly are they doing for me? I also have eddy alluminum heads any recomendations on rockers? Thanks Tom

67 plymouth 360 eldenbroch heads double valve springs as recommended by comp cams Problem is springs must be hitting seal and deterioting it, This took less than two years. Checked with machine shop they used a white seal and said these are smallest diameter they know of. Whats everyone else...

67 barracuda 360 rebuilt maybe 2 years ago. I get it out this spring and it smokes out left side. Exshaust is wet, Im thinking its fuel not oil, How do I fix this, carb is 2 year old holley 770 street avenger. Car runs excellentd just smokes constantly out left side. Note excessive smoke but...

Anybody use or no anything about this. > Ignition & Electrical > Distributors > Vacuum & Mechanical Advance Electronic Distributors > FireCore Vacuum Advance Electronic Distributor Your premier source for Performance Parts & Aftermarket parts for DaimlerChrysler Cars & Trucks. We are the...

Will these rockers work with the stock shaft? What else might I need to do Installation? Crane Cams 69771-1 - Crane Steel and Ductile Iron Shaft Mount Rocker Arms 1.6

Going from a hyd lifter and rocker assyemly, to a hyd lifter with 1.6 roller rocker, what exacly does this do for car as far as performance, rpms etc.

I just bought a set of adjustable rockers from a 273 motor, I got the complete package, My question is can I just buy 1.6 rockers and exchange them for the ones that are on this set up or do I need something completely diffrent?

If my initial is at 22 and my total is 34 on a stock 340 mopar distributor, do I need to shorten or lengthen the slots to get 2 or 3 more degrees on total? Memory getting old just like me, Im thinking lengthen the slots a hair or 2.

Does a 727 big block and small block converter interchange?

My friend was telling me of this special 340 transmission is there such a thing, and what makes it diffrent?

Any body no anything about these cam, mines aprt right now and I was thinking of throwing this in.

I will be putting eddy alluminum 60779 on my car in about 2 weeks can anybody recommend a good gasket, and should I use a bolt kit or studs? Part number please. Street driver. 360 with 10-1 compression.

I found these on ebay will they work on a la engine or what would I have to change to make them work? item number 251209217793

Anybody no anything at all about these heads. ebay 261097529064 Item number:

I have a 67 barracuda with a 73 360 My pvc is going from the drivers side valve cover to the right side of the car 770 street avenger, with a breather on right side valve cover, is this correct or should it be going to intake manifold? Which way is correct?

Well lets see I have a 360 that uses a lot of oil did compression check today every thing was 160 to 165 plugs looked great I installed a new intake about a month ago that didnt help. Could it be the heads? New valve seals about a month ago also, didnt help. cam has 494 lift,automatic, How...

I just looked at some J heads with this number, what does it mean, 3418915 F

Anybody no anything about this place these look like a great price, http://www.magnumforce.com/store/detail.asp?ProductID=3902 on tti headers. Also considering a set of eldenbroch heads to finish my winter work is there a good place to get them or are they 1450 a pair every where?

I need a 32 tooth speedo gear long shaft anyone have and good extra ones for sale?

Im putting this intake on my car it has a old eldenbroch 4 barrel intake on it from the 70s but not sure what it was will there be any kinds of horse power gain?

Ordered one on ebay the nice rpm air gap look alike 203 dollars with enduro shine. Bolt holes dont line up, junk, they are taking it back no questions asked. Ordered eldenbroch today. As always you get what you pay for.

Im running comp 995-16 valve springs right now and am gonna down grade to 901-16. My question is will my retainers and keepers still work with the 901 or do I need all new.

I was having trouble with oil consumpsion, after doing some reading I found out you shouldnt use the umbrella seals on double springs. What can I use without doing machine work or should I just get single springs and use them? I have a comp cam with 484 lift, will my retainers work on single...

Anybody use there air gap manifold for 360 or no anything about them?

My friend has a holley 600 on a fresh 340, doesnt want to idle right all the time, could this be dirt or vaccume leak? Im thinking dirt because it surged on his old 318. Sometimes idles and drives find then it will surge and not idle.

I have a la 360 rebuilt 1 year ago that uses excessive oil. ! qt to 200 miles, doesnt smoke alot, smells rich at idle, heads are 73 360 we took to macchine shop had them checked they put new springs and seals in them and said they were great. I did a compression check all cyl were 155 to 158...