Search results for query: *

I would like to sell this as a whole package deal rather than trying to part everything out. If I can’t get it sold as a package, then I will have to start piecing out everything. -17K mile 6.1 Gen III with ECM -Schumacher engine mounts for A body to 6.1 conversion -A518 transmission with US...

Selling the SB 727 out of my Dart. It was in the car when I bought it and supposedly rebuilt prior to me buying the car. Valve body is a Cheetah 17680. I had a custom 8” converter built by Dynamic Converters that is stalled at 5500 rpm. I have put about 1200 miles on the car since I’ve owned it...

Found a deal on a Dana I couldn't pass up so I'm putting a feeler out for the 8-3/4 out of my car to swap out. It was built by member MadDart here 67 Dart Build Triangulated 4 link & Mini Tub. I upgraded to Moser axles last year and added Dr. Diff rear disc brakes which only have about 200 miles...

BBP front disk, lower control arms, spindles, and ball joints from my '69 Dart. Around 1000 miles on them. LCA's have new rubber bushings. Everything is in very good condition and there is no pitting in the control arms. They are nice. $400 for all. These are heavy. Looking for local pickup or...

Selling a used Kevko M301 Oil Pan and pickup from my 340. Works perfectly. Access panel added inside to clean the front baffle chamber. Has a small dent on the back bottom of the pan. This has a oil level plug, no dipstick. $270 new. $175 shipped.

Selling the 73' and up BBP disk brake setup with spindles, lower control arms, and lower ball joints from my '69 Dart. Bushings are new in the control arms, new ball joints, little to no wear on the parts. I had only put 650 miles on it the setup. The rubber brake lines have a rubber sleeve...

FR1540 FR 16:1 ratio manual steering box with pitman. All parts have 650 miles on them and are like new. $400 + shipping FIRM.

Parts are located in Wichita. Came from my '69 Dart. Just looking for some offers to move this stuff out. Fuel pump worked, but wouldn't feed my car well enough. - $20 Door handles - $10 Mirror - $15 Fuel gauge is brand new - $20 The rest just shoot me an offer!

I was going to use these in my BBP conversion but ended up buying a whole different setup. These are from a '73 Charger with Pin type calipers. $75 plus shipping. Located in Wichita.

Water pump that came off my running '69 340. $40 shipped or make offer. Located in Wichita.

6 blade fan in good condition. Came off my '69 340. $50 shipped to lower 48. Located in Wichita.

Brand new Moog K7040 strut rod bushings. $35 shipped to lower 48. Located in Wichita.

Alternator barely used removed from my '69 Dart. Unsure of the brand but I believe it was a 45 amp model. Only thing I altered was the thickness of one of the mounting tabs so that I could get it to line up with the crank pulley better. A washer could be used to fill the removed area if need...

This a rebuilt master cylinder for disk brake '69 Dart. I used it for a couple months. Works as it should. $35 shipped. Located in Wichita.

Selling an electronic distributor with Accel wires from my 340. Worked good when removed. When I got the car, it was set up mechanically advanced. Not sure if the vacuum advance works because it was never hooked up. $100 shipped to lower 48. Also have a Chrome box if interested for a...

Mopar Performance valve covers for SBM. Comes with vent filters. $75 + shipping. Located in Wichita.

Power steering box and pump (forgot to take pictures) with lines removed from my '69 Dart. Went to manual steering. The box had a small leak at the pitman shaft seal. $100 + shipping. Located in Wichita.

Used PRC fuel log removed from my Holley 4150 style carb. Still in good condition. Didn't leak when removed. $50 + shipping. Wichita

I have for sale some left over small block pulleys from my build. The March pulleys are possibly kit number 10270, but I'm unsure. I've taken pictures of the overall dimensions. The alternator pulley is new never used, the water pump pulley is used with some light scuffs, and the crank...

I bought this Addco front sway bar for my '69 Dart but don't need it. It had new PST rubber bushings when I bought it and I never installed it. The previous owner installed the bushings and had only pushed his car around the garage when installed on his. $80 + Shipping. Located in Wichita.

I have a Petronix Ignitor III and 45000 volt flame thrower coil that are new in the boxes and never used. Coil is the chrome version. Went a different direction. $170 shipped.

10" Pro Street 30 series Hughes converter for 727. Part number 24-30HD 24 spline with heavy duty sprag http://www.summitracing.com/parts/hup-24-30hd?seid=srese1&gclid=CLbqrI_1t7wCFYNi7Aodr04A7g. Going with a higher stall. Nothing wrong with this converter and worked well when I pulled it. $300

Yukon axles with Green Bearings for stock length A body BBP. Came out of '69 Dart. Little use on these. $300.

I have an Autometer 5" tach with shift light. Works perfectly. No scratches on face. $120 Also have a set of Accutech gauges for oil pressure, water temp, and fuel pressure. Also in very nice condition. Comes with SS braided lines as shown. $150...

Landrum rear leaf springs. One has 225 written on it and the other has 200. I assume that's the spring rate? Can't tell you much about them other than that. I can only assume it's one of these http://www.landrumspring.com/pages/leafsprings.htm?s_subcategory=8&pagenumber=1 I will look again...

A-Body 8-3/4 rear with Yukon axles and green bearings with low miles. Axle housing has straps welded to the spring perch areas - $600 OBO. Wichita.

Used pushrods out of my W-2 headed 416 motor. Unknown brand. I don't know what to ask for these. Make me an offer on them. ]

Used set of valve springs with dampener out of W-2 heads. Were used with a .555" lift cam. Unknown brand but are nice springs. Tested spring pressures shown in pictures. Motor was believed to be low mileage. Was going to re-use in my rebuild but went with a larger roller cam so I needed to...

Used Bullet cam out of a 340 stroker and unknown brand lifters. There are no parts numbers for this cam so there are going to be some unknowns. Builder checked that the lift is .555 and duration is somewhere around 255 @ .050. I know that it sounded pretty mean in my car. Motor was believed...

These are used pistons out of my small block. 4.070" bore, 4" stroke. Believed to be low mileage. I had to go with other pistons due to oversized bores after hone. Otherwise, these were going to be re-used in the rebuild. They haven't been cleaned so they are just as they came out of the...