Search results for query: *

Without going to a bigger joint, what can I do to increase the strength of my 7260? My current joint has a grease fitting which I've heard reduces strength b/c the joint is hollow. I'm using these straps: http://chucker54.stores.yahoo.net/ujstrapandbo.html What's the best 7260 joint and...

Just bought a rebuilt powr-lok. My axles will not slide in all the way b/c the inner and outer splines on the powr-lok are not exactly lined up. They're not off by much but enough to prevent the axles from sliding in the remaining 1/2". Is there an easy way rotate the outer spline and slide...

I like the idea of a manual valve body put I don't want it all the time. Is an automatic/manual valve body a good option? Does anyone use one? What's a good one to get? http://www.summitracing.com/parts/TCI-122400/

I'll admit to not knowing much about autos and can use any advice you guys have. I just drove my car for the 1st time since I began the big block swap 5 years ago. Everything was great except the trans would not shift. I had it in drive and wound it up well past where I thought it should...

I need to order a drive shaft and u-joints. How can I tell which u-joint I need for the axle yoke? Are the diameters different? The hole in my yoke measures a hair over 1".

I've got a factory pan (about 1 1/2" deep). There's fluid leaking from the dipstick tube. I figured it would leak b/c the OD of the o-ring I used wasn't much bigger then the OD of the tube. Does anyone have a P/N for the correct seal? I'd also like to add a deeper pan. Where can I find...

I started the motor last weekend w/ 3.5 qts of trans fluid in the pan (none in the converter). I ran it for 2 mins at 2000 rpm. The trans took about a quart so it now has 4.5 or so. I want to run the motor for 30 mins tonight to break it in. Will the trans be ok if I leave it in park and add...

My dipstick tube has a grove in it. I assume this is for some sort of o-ring seal. Is is a standard round o-ring or more like a square seal? Where can I find one?