Search results for query: *

Hello all I need to replace the tempeture sending unit for my 74 318 I've looked locally no one carries it here. I had two parts numbers (standard Motor parts TS17 or BWD WT127) although on the TS17, the seller said it was not compatible... Can anyone give me a correct parts number and...

Hello all Anyone know what this item is for, and is it replaceable? It's up under the dash and seems to be on the #7 fuse circuit I have been having problems with that circuit and finally I think I found the culprit bad connection at the door jam switch, only getting 3-5 volts. replaced the...

Has there been any update on switching to a blade type of fuse block my search here was last updated in 2008. It does not seem like it would be a big deal... has anyone done the switch 74 Dart Swinger Best Dave

Could anyone give me the bulb number for the (Map light) It seems its the only I have not been able to find. Thanks

OK for a long time now I've had no "map light" dome light.. does not work from the door jam switches, does not work from the headlight switch. So since I have been working on the 74 Dart, I thought I'd install a new headlight switch... oh boy. So I bought one off of Ebay, and it seemed to be...

OK so I'm here again.. damn I hate automotive wiring .. for the years I've had this 74 the light always worked. now it does not. did a voltage and ground check... both OK.. has a good 10 + volts and grounded to the dash frame... but the filament will not light, I bought a new one from...

Hi well another problem shows up in the old 74 Dart the dash cig lighter is not working. now its not the electrical has voltage but what causes the element to stop working and can it be repaired. If not, is anyone making a replacmement, I guess I could buy a new one. But anyone know why...

Well the Gremlins hit my 74 Dart today. Started off by having a Flat... Then heading down you Laguna Beach, the 318 started to run rough pull up to a light stop and she would shake.... pull up, put in neutral and she was fine.. let the car idel, pulled number 2 wire, she sherk bad, pulled...

Hello So I'm posting again. I had to remove the instrument cluster from my 74 Dart to fix a lighting problem. After reinstalling the cluster, my gas and temp guages are not working, also the parking break and oil light are not working I have taken out the cluster again to see what the...

Hi So I'm trying to run down a problem I'm having with exceloration I have a "Cardon" reman dist in my 74 Dart 318 Ones been in the car for over ten years with no problems unitl early this year when the vacuum pot went out. So went down and got a replacment. This one acted the same way...

So I have this 74 dart 318, not that that makes any difference. I brought it back from Az a few years ago, after lending it to my niece while she was in High school.. So she said they had trouble with it starting sometimes which after I got it home I found out, and I found the solution, it...

Hello All I'm trying to get this 74 Dart swinger working and running right and I've run into another problem. I've attached 3 photo's hope they show well the connector, does anyone know the pinout for this, where its feed from any help the next is photo of open end wire's as you can see...

Hey guys, I ran into an interesting situation the other day and could use your help ASAP. I was driving and noticed an oder then a wisp of smoke from my steering column, of course this got my attention, and it happens after about 10 min of driving. So needing to do other work under the dash...

Hey guys I've read many threads regarding "no spark" in one many cases the guy replaced everything in the ignition system , cleaned some contacts, moved some wires and the cars running better then new. this is after he checked everything and it was all ok. So not being a "mopar" guy , but...

OK, on the 74 dodge dart, when facing the car the ballast resistor is on the drivers side fire wall My car has the dual ballast resistor, it has a cut out on one end and a oblong cutout inside and next to the posts. Which end should have the double wire (dark blue) and which wire is...