Search results for query: *

This is upper control arm bushing,it looks like it missing that washer that has bumps on it to bite in when its tighten,please have a look and tell me if so.that creaking noise is back.

Do i have to support the lca when removing the uca bolts.

Well the 71 is on the road,every thing new in the front end everything,but there is a lot of creaking going on,all oem rubber,it happens when i push up and down on the fender.WEAR to look,any thought out hear. thanks.

Its bean a wile seance installing t bars, it looks good so far the adjuster is all the way down.When i removed the bars on the back of the rear thears a line,it was say straight up and down,now its say 10 o clock,does it mater where it is.Thanksssssssssssss.

Are moog bushing different than oem.the 1 on the right is how it came apart you can see the bushing that says front and is flat booth sides,but the moog bushing that says front is not flat booth sides,witch way does the moog go.

Just started to think about lower ball joints.MOOG 100 DOLLARS or 50 dollars econo grade,a big difference in price.Whats your thoughts on the 2 is there a bid difference in how there made.Thanks.

WELL I am thinking on replacing my oem bushing with Moog k7 103.Will it make a big difference going that way? teach me, allso I have read about witch way the arrows face.SO I need to gain as much info as I can get. thankssssssssssss.

Looking to buy lca stiffing plates,does anyone know wear in Canada i can get them.Thanks.

OK guys,what causes booth front tires to have a little tire wear on the out side .When we went for the road test it steered nicely and stop dead straight.Someone has raised the front up some,could there be to mush caster?.

How do I get the dust shields off the front disk brake car,never did this.

I just got booth leafs on the Duster in, the leafs are stock + 1 inch NEW.In the first pic booth sides are at ride height,booth side same, something is not right,the second pic the angle is not at ride height,jack stands under frame.I did lower very slowly, what now,as I was jacking the rear up...

Just got my parts,they sent me urethane shackle bushings,I have used Rubber in the past,witch are the best to use.

Do any of you grease the rubber shackle bushings befor you slide them in.

Was under the Duster and notice that 1 of the upper shock washer is missing,any clue were I can get just 1.The shocks that i took off some 3 mouths are all most new., just need just 1 .

How many leafs are on the XHD Mopar springs. I am thinking of geting them, for the Duster,any 1 got befor and after pics of there Duster, did it lift it up more than the stock look.Not a fan of the low rider look.Any thoughts.:)

I just notice the left side shackle angle is not right.:pale:if I jack it up at the frame it moves away just like the right side,but when I lower the jack it goes back agance the trunk pan.The right side angle is were it should be.IT was not like that when it went to the body shop I would of...

Hi guys want to pick your minds on what to use to remove grease from the k frame and steering gear. I would like something i can brush on and rinse off.Have used gunk degreaser in a can but done get much for the money.

Ok I am thinking of building my own sub frame connectors, for the Dart.Ihave a buddy who works at a muffler shop and they have a drive on lift so me thinking this should work right or wrong,any thoughts.

I have always wondered,what would happen if the strut rod was not tighten the same on L R ,could over tighten pull the tire closer to the front fender.

Looking into the future to get the MP P8684286 bolt in frame connectors,did some searching here on this mod,and would like to do this,this winter.I know most will say make your own way cheaper,but not willing to go to that kind of work,and no one around here me thinks with the skill to make...

Just got my new T bars,made in Canada:cheers: I ordered P# 5249150,I opened the box and there is a white sticker on booth bars made in Canada with the #2535895 and the outer is 2535894. Anyone know what they are,did I get the wrong part.The box has the P# I ask for tho.

Just about to order new Torsion bars for the dart .920 I can get from my local dodge dealer,same price as everyone in my area,my saveings are on the shipping, 420 for the bars,its Sunday there closed,so my Q is can I get the 1 inch bars from my Dodge dealer,anyone know.If I go aftermarket sure...

Started calling around here in Canada for new Torshion bars for my dart.Dodge dealer,National Moparts,SMC Classic,they want 420 for the pair,in the U.S. 199,why double here.The bars I priced out are the .920.

Thinking over the winter I would like to replace my 40+ year old T bars.Looking for input on what is out there.This is a street driven car,not into auto cross stuff or big time corning.I hope to get something with out heaving to change anything else.All front end was rebuilt about 2000 miles ago...

OK got them on last Saturday and had the dart out last night for our local cruise in,there was some talk of some who thought they were to stiff and noisy.Well for me there perfect handled better than I expected almost no body roll going into corners,and no bounce in the front anymore,very little...

So now that the Dart has the XHD rear springs in and I raised the front T bars very little for an even look,me happy but,sometimes going over some small bumps in the road and if there is a crown in the road the front bounces up and down not much but enough that my low hang en headers hit,wished...

Well got off my fat assssssssssss this afternoon and installed them but I only got an 1 1/8 more height from where she sat before,dang it me thought it would of been a bit more.How does one relay know what your getting now a days,for all I know they sold me stock springs and said there XHD 1...

I have a nice clean set of front leaf spring hangers coming,is there a left and right,what I am saying are they side specific and if so how do I tell witch is L&R.Thanksssssssssssss.

Ok so got my new leaf springs XHD+1 and I need to drill a biger hole for the bolt that goes through the front spring hanger.Does anyone know what size bit to get the right hole.Thanksssssssssss.

Just waiting for my new leafs springs to come in:D,Q can I remove one side at a time or should I drop booth sides,how would you it.