Search results for query: *

First off hello my fellow Mopar gear heads.i have a post on B bodies,but more options is best.ok I have power brake disks 11 inch disk and 11 rear drum.i want to go to manual disk,up front.i have been searching on line for a M/C . Doorman part number MCA 75817 any thoughts.cheers.

hi guys, I need the grommet for my org power disk brake booster this is for my 71 Satellite went for a rip the other day and the check valve and grommet came off NO BRAKES.i tried with no luck can someone help me find that rubber grommet please.i check rock auto it looks like they have just...

Now I AM ready to install the rotor seal. witch way does it go in,is it the first pic or the second pic.? thanks again.

AS you can see the pad is a tad to small to fit into the left caliper, the right pad fits perfect,if i swap pads from 1 side to the other the other fit is fine ,so its not the pads fault,the caliper the left 1 is at fault.so what to do order a new caliper,or do you think its safe to grind a...

How many of you replace the race in you rotor? Just got my wheel bearings + races i have look at the races and they look fine.

Do you think this after market hose is seated? I have turned it till its feels tight,but for some reason,I think that the flat spot on the hose should be flush with the block.What ya think.

JUST got my emg cables from NAPA.1 is longer than the outher as you can see,will this screw adjustment?

Well I got the rear end out today and thought may as well replace the wheel cylinders. 1 side came loose but the other 1 well i rounded the 2 nuts a tad:violent1: what is the next step and what to use to get them out.So far everything has been smooth sailing.

All most ready to put the dash back in.But me dont know witch color wire goes to witch prong.On my harness there is white and pink,could someone tell me were the go. Thankasss.

Ok working on the 74 Duster little by little wile its in being painted.On to the brake stuff, my local parts store says there is no listing for my front parking cable[ the 1 from the emg handle down] so what others year cars will work,maybe he was having a bad day and did not want to look into...

Have anyone of youssssssssss bleed your brakes by your self.An old timer said to me once,I dont need any help bleeding brakes:???: I done even need any fancy tools.So he told me he used a 2x4 pump them up forced to the seat open the bleeder and there you go done.So I tried it what do you...

I notice that my R R wheel cylinder is leaking no bigeee. Off to my local parts supplier get that sucker ,get home and find out my original bolts are to small,F^%k sake of to get bigger bolts,why cant parts be right in every way.:violent1:It on buttttttttttttttt

Ok I just ordered front backing plates and 69 wheel cylinders,too much daze and confession on my part,I am very sorry for being such pain,I think after this I may give up the hobby I so love:sign3:this way the next owner will no whats he is geting,or just up grad to disk witch I should of done...

Ok I just got my LF wheel cylinder ask for 69,it does not fit, my backing plate is the square opening what they sent is shape like a football shape.Whats up help.

Well just started to work on the dart again,but would u know it front wheel cylinder is dripping.My brain is not what it used to be,but I did get it removed.But I would like if someone could up load a pic of how its put back together.69 Dart with 10 inch drums.Thanks.

Ok well bench blead the master now and is all installed in the car Without bleading any of the 4 wheel cylenders my pedal is stiff like there is no air at all, is this normal or should I still bleed all 4 cylssss.

Ok its been a wile but I have to ask the, rear of my master is almost empty,me has a leak some were.So is the rear for the front brakes or the rear brakes,i kind of wonder why the brakes did not seam right.i have manual 4 drum brakes,as of now i see no drips but under were the master bolts to...

Hey guys what can my son use to clean his rotors up.His car has been sitting for the last 6 mounths and has rusty rotors.The rotors are in good shape would an sos pad do the trick.His mopar is a 2001 Intrepid.:cheers:

So my rear axel still has the left hand studs.The axels are out waiting for bearrings.Can I remove the 5 studs myself or do they have to be pressed out.Thankss

Nothing seams to be going my way on this Dart.I have 10 inch drums on the front thing is there not the same they dont match.Someone must of change one at some time.Right now I could care less that they look different but does it mater the shoe size is the same.kind of feeling pisssssed right now.

When I took apart my front drum brakes on the dart i was baffeled when i tryed to undo the wheel cylinders.The 2 bolts are hid kind of behind the spindell.I had to remove the backing plate to get to them easy.Could someone have installed to big of a bolt.I just bolted the spindell lower ball...