Search results for query: *

Someone was looking for something like this. AMERICAN MOPAR MUSCLE & SWAP MEET | Facebook

I got these awhile back and really don't know exactly what they are correct for. They fit the A Pillar on a 67 -9 Barracuda. Have 3 screw holes inside to attach to the A pillar. Are these for a convertible or just a fancy piece of SS trim for all A bodies or what ? Thanks for any insight @

Need some help on diagnosing the noise coming from engine on idle. With engine idling , standing outside of truck, can hear what sounds like maybe a lifter/ rocker arm ticking real loud . Bring engine off idle and noise goes away. Has 150,*** miles on it ,still runs ok . Just looking for...

Finally found some time to go through some parts I had laying around. I can use some help ID ing this stuff. Thanks in advance ! First up are yhe fiberglass reproduction parts . Marked Superbird mag. Any idea on these ? @dadsbee

Last week Theresa and I was on a road trip and I got board sitting , so I got on the local craigslist and found an add for a bunch of Chrysler Marine engines for sale at a reasonable price. Not sure what I got myself into , but mostly scrap, and some nice pieces for sure. Hopefully...

Theresa & I have to go up North to MO for a bit next week. So we took the opportunity to load up a bunch of Mopar goodies to drop off along the way. We will be taking 75 N to Chattanooga, 24 west and on to St. Louis. Then on south to New Orleans for a bit ! Then back east & south back home...

First up is a narrowed 8 3/4 mopar. Total width axle flange is roughly 30 1/4" Housing is roughly 25 1/4" and the mounting brackets are at 18" What would this be for ? As in Drag car, Pro Street , Ladder Bar or 4 Link ? Solid econo rail ? #2 Is some 64-67 Mustang Calipers mounted...

Can anyone give some info on what these parts are from ? Thanks in advance !! @HemiSSDart First up is this fan ??? Next is this. Pretty sure an A body console bracket ! Last but not least the rear springs. Hotchkis ???

Coming to a Post Office near you. Available tomorrow !

Hey guys any help IDing this stuff is appreciated ! #1 Looks like it goes on 8 3/4 rear end, but I've not seen this before ! #2 this switch has 4 prongs on the back side. One for power. two lite up other does nothing/gnd ? #3 Trim clips of some sort ? Mopar ? JUNK ?

Theresa found some guy here in Florida on FaceBook that was selling off his fathers small hoard of mopar parts. Of course that got my interest up , so this moring we loaded our trailer and headed north to Sarasota , about a 2 1/2 hour ride. Another hot day here. Met with the guy and...

Ok , I have a couple more things I don't know what they are or for ! All help is appreciated ! #1 #2 Head light bezel from what ?

Hey guys and girls ! I have a couple things I would like to figure out what the heck they are ! First up is #1 Small Block Mopar Real Race stuff . Header flanges.. Up #2 I know for SB , But I cant find it anywhere one the NET ! Up #3 What the heck are these from ? and #4...

Got a tip from @69FBCuda the other day on a CL add that was kinda close to me, 2 1/2 hours close, one way! Contacted the seller and made arrangements to come pick her husbands parts hoard. Gathered our trailer and Theresa and I left the house this morning . Made a stop just North of Tampa...

Here we go. Just got back from a Parts pick-up and have some things I need to figure out what they are . Any and all help is appreciated. ! First up is a pair of old seats. Probably not original covers on them. I'm guessing early 60s , any idea what car ? Next up is an old console.

I've been looking for some NOS ( MOPAR) air for this 67 barracuda I got a while back. It is totally all original. And I mean plugs , battery and I think even has the factory oil in the engine.( I don't see a sticker anywhere where someone changed it!) But anyway a couple of the tires are getting...

More mopar pickin today. Got a pretty clean Dart . Slanty. Auto. Now 5 hours back home !

What year was the 273 introduced ? Is it possible for a 65 Coronet to have an original 273 from the factory ? @toolmanmike

Theresa & I went scouring our local area a couple days ago looking for this 65 Barracuda I had heard about . Finally found it sitting on the side of the owners house. Stopped and knocked on the door , talked to the owner. At first he said it wasn't for sale. This guy was 84 years old ! Says...

Black Ghost: The mysterious 1970 Challenger that dominated Detroit street racing

Had a local guy call me to come by and Pick his parts lot today. So Theresa & I took a ride and loaded up some nice Mopar goodies ! The older gentleman had a couple nice mopars in his shop, A 73 440 Challenger and a 9? Daytona Prostreet 440 twin turbo. That would be a fun car to have ...

Ok guys , this one may be a little harder ! I have a scatter shield & flywheel that I believe is for a GM . I think the flywheel is for a BB. Then to really mix things up is the aluminum adapter that will bolt a 833 to it. The center hole in the adapter is for the large front bearing...

Can anyone I D these ? #1 #2 #3 #4 Thanks for playing !

I have a tag that came with my current project car. Just wondering if someone can decipher this for me ! Also should it match or have a partial vin from the car on it ? Thanks in advance !

My friends friend up in Wisconsin sent a picture of this dart. Anyone here own it ?

I have a couple parts I need help ID-ing ! Thanks in advance. First up is the quarter panel patch Looks like an early A maybe ? 26" at the top And then these bumper guards !

I recently acquired a rottissiory with a car I purchased. Unknown manufacturer. Looks used and abused some. What is something like this worth. My neighbors buddy is interested in this. Thanks Al.

My Ram pick up turned over 100,000 miles a while back , so I figured it may be time to do some maintenance. Change the plugs, fluids ect. First off the it has 16 plugs, which I knew . But I didn't know they would cost about $100. The truck is 4 wheel drive so a gallon of synthetic gear lube...

OK, Pun intended! Didn't know what else to call this thread. So most all you guys and girls know I'm on here listing / selling a lot of parts. Started out by selling my extra parts from my projects. Then one day I got a message from a member here that a guy he knew had a bunch of stuff he...