Search results for query: *

It's a joke. I've been running air bags for a couple years and nothing but problems. Just wanted to give heads up. Air Ride sucks.

I just ordered an alter k for my 67 coronet. I'm going to install without pulling motor. Any tips on doing so? How did you support the motor with kmember out?

Currently have 11/16 stud and need to change to 5/8 for new air ride shocks. Can someone tell me the procedure for removing the upper shock mount stud? I think it is held in with a locking nut inside trunk but just want to make sure. If you have any pictures that would help.

I'm running a triangular 4 link and wondering if any of you have an opinion on the pinion angle. there are some mixed theories out there and I'm hoping for some clarification.

I know there are a few folks here that have installed a MII front end. I am looking for some feedback on the install for this. What oil pan? any reasons why not to do it. etc. etc. By the way, I am not looking for feedback on magnumforce or alterk. I know these two options well but would like...

I would like to replace the rubber lines with steal braided. Anyone have a good source for this? It looks like I need a 90 deg on one of them to stay under the TTI headers.

Installing one this weekend and wondered if anyone has any tips or issues I should be aware. Any pix?

Some of you may know that I am one of the few if not the only early abody cars running a triangular 4 link with air bags all around. It has been a good install and I just had the first glich with the system. It started out as a very slow leak that I could not trace and then all of the sudden my...

Anyone running the CapAuto k member? Any likes or dislikes?

Has anyone installed a rear sway bar with a four link triangular set up? If so, which one works and do you have any pics?

I am going to install the front sway bar this week and am a little concerned about ground clearance issues. If you look at my garage pix you will see that I ride very low on air bags and anything that hangs more than two inches below the oil pan could hit the ground. If you have pix of this sway...

Just installed the 4 link air ride on my 64 valiant and would like to ditch the torsion bars to relieve some header clearance issues. I know the front end needs reinforcement to do this and I am wondering if anyone has installed the forward strut kit on www.magnumforceracing.com. Will this allow...