Search results for query: *

All the rebuild kits i see say 64+, did they change the size of the "floaters" and other parts or will they work on a 62?

anybody have a part number and in stock? prefer moog 62 lancer 3.7L manual steering

So we took the Notch to be aligned and it would not align properly, It has not enough caster (about a degree) with the rear adjuster all the way in and the front all the way out (not proper camber spec \\...//). So the alignment guy said mopars had two different control arm lengths, one for a...

Ok so everyone i know and myself have always used 75-90lbs on the u bolt tq due to the 1/2 hardened bolts and hardware. recently i checked the FSM due to a tip from rusty and it says 45 ft lbs. So here is the question... With a center locating bolt holding the leaves together how could the...

im wondering what parts of the suspension are the same, im looking at doing a friends 62 lancer (front and rear suspension) and didn't know if all the bushings, strut rods, etc are the same? thanks!

is there such a thing? rubber does not hold up well here in AZ

i was looking to upgrade my strut rods on the 73 as i'll be going to big brakes and rim/tires, but being a daily i dont want heim joints. does anyone make an adjustable strut rob but with a bushed end vs the heim ends. or would it just be better to get the heavy duty strut rods from firm feel...

hey guys i was wondering if you have installed 3" studs in stock 73+ disc brakes and also 8.25 stock axles. pics and part numbers would be great!

ok so my boss had these bars layin around and i knew they were big. using the chart on the mopar rag site does not have these listed... 451L and 450R these have a mopar PN number also but the number isn't legible...

ok so i got springs and new front bars for my 73 dart... but what shocks?? my dad likes the KYB's but after all the threads about how they are so stiff they bounce i know to pass... we cant afford 400 bucks worth of Bilsteins but dont want crappy shocks... what is a good "entry level" shock...

hey guys our 46 dodge P/U is coming along nicely but have run into a slight snag... no one seems to have the dust boots for the transverse T bar set up... if any one has a line on them it would be of great help!

i think they discontinued these cuz i cant find a part number anywhere! i want them for my dads 73 dart thats were kinda doing a pro-touring thing on... i would love the hotchkis setup but money isn't there... will be going with there 1 1/2 front and 1" rear bars eventually though! or...

so where is the best price on offset shackle kits and how much can i gain?

so i found this chart for rear axle widths comparing the 7.25 to the 8.75... im trying to figure out where in relation is the new 8.75 gonna be... looks like its shorter?? or is the difference taken up by the flange to axle flange distance?? chart is from moparts