Search results for query: *

Asking for help from the mopar gods once again, I am having trouble finding info on my 2-speed wiper motor and wiper/washer switch. I have a 2speed wiper , has 3 wires on firewall plug, looks like this: Done my searches, have 67 and 67 fsm for reference but passion4mopars has a...

Trying to find best spot for voltage regulator, coil and Ignition module. Its on a 67 Barracuda and I do not have the motor in so coil mounting may be an issue. Here are some pics, no holes drilled yet so I welcome advice and opinions and pics of yours if you got em.

To start it is a 67 Barracuda, 273. Completely re-wired the car and have bypassed the amp meter and installed a volt meter in its place. I have read the mad electrical tech docs on volt sensing. I purchased a Bosch AL504x (squareback) and ordered a 70's style voltage regulator. I read the...

Can someone explain why / why not use the pertronix III coil, it is supposed to work with HEI type ignition, Its been said over and over again to use E-core when converting to HEI.

My 67 did not have ground from battery to core support. Anybody got a pic of a 70 and later A-body showing the ground location on the core support? I know I could just drill a hole but I would at least like it to look like an original mopar theme. Thanks in advance!

'67 273 with the cast iron pump, I changed my mind on the 70's style aluminum pump because I have a TRW Steering pump and issues with pulleys lining up etc so back to the cast iron pump. I have the new brackets from AR Engineering and it states it is for the aluminum pump. I emailed AR and they...

Where is the best place to get a signal for the volt gauge?

I made a new wiring harness while I was at it: A little elbo grease and a blasting cabinet.

So I got tired of looking for / piecing together the original antenna, but I did get the original bezel that covers a big hole on my fender and with any luck it will work with the electric antenna I have coming. I am keeping the stock radio so there is no blue wire to hook up the antenna to...

Ok, The antenna mast is broken off, has anyone replaced just the mast? 67 Cuda Notchback

I was thinking of running my headlamp relays off of fuseable links just because I think it would look cleaner as opposed to hooking them to fuse holders. Does it matter what you use really as long as there is protection? It would be cool if there was a really small relay box with a fuse holder...

Lets see your aftermarket fuse panel installed, how you did it, and tips please! Rbob

After changing the amp meter to volt meter and upgrading the voltage limiter for the gauges I removed what looked like a condenser. Turned out it is a resistor or radio noise suppressor (I think) So reading about it there is one in the alternator, one on the coil and this one. Do you guys...

I am putting my car back together after a couple years (went fast) and I have this wire left over. It is the first item. I believe the spring is for the glove box hinge and the rubber thing I am not sure of yet. Any ideas??

I am ready to pull the trigger on a wiring harness (AAWHighway 15 Complete Universal Street Rod Wiring Kit), I think it will be plenty for my build. My original engine bay wires looks like they are wrapped in electrical tape, or some type of plastic and not cloth like the rear loom. What did...