Search results for query: *

Anyone have one or know where I can find one?

Putting this out again, if I have to settle for 8.5's even. For the 8.5's don't care which of the 2 back spaces either the 4 7/8, or 3 5/16 but for the 10" really would want 4 7/8" Would prefer polished but let's see whats available.

As above polished if possible, let me know what you got. Thanks.

Hi, anyone got a good driver quality 75-76 valiant grille, with all it's teeth, that doesn't mind posting to New Zealand? I'm not worried about the usual tab missing but if you got something at a not crazy price I'd like to see.

Hi checking if anyone has a spare sbp autodrag in the above size, prefer polished, one of mine is cracked. Thanks.

Hi guys still looking for some autodrags to replace my cracked one, as it says above, I would like a pair in BBP prefer polished, or if you have a single SBP, I can get that machined, I can even polish some satin rims if that's all you have, but please check for cracks, and please no crazy...

Still looking for some front runners, something to go with what I have already. Prefer 15 x 5.5 but let me know if you have something else, even 3.5's considered, other brands that look similar etc.

Hi all, anyone got a spare 15 x 5.5 centreline in small bolt pattern? I bought a couple off here a little while back and see that one of them has a large crack on the back face, because it may not be fixable, and I need a spare anyway, has anyone got another to sell? Prefer polished. Hopefully...

Hi Guys after a chrome seat knob for the passenger side of my 75 duster bench seat. I know I can buy a set of repro's for $26 but trying to save bucks where I can, and I only need one. Anyone got a spare? Can pay with PayPal, need to post to CA. Thanks

Hi looking for the above, just need one of, pay by paypal, and postage to CA, or New Zealand. Thanks.

Any one got these? Maybe you have a wreck that has these little patches? Apparently only on cars with no stainless trim on the drip rails. Thanks.

Hi all anybody out there got a useable drivers door card with the caravan interior for my 74 duster? Mine is rough, and worse been badly covered over by gluing table place mats over the damage making very hard to fix now. :banghead: Would need it sent to 90262 CA, if you've got one lying around...

Hi all, I bought a rougher than expected internet buy 75 duster, I'm after a few bits to help tidy it up. I need a rear duster badge with the white painted insert, a black armrest, and need 1/2 vinyl roof trim, at the least a lower right front chrome pillar trim peice and screw. Also need the...

Hi Guys, wanted a spare tire hold down for 67 dart, doesn't have to be year specific, as long as it works, would like the bolt and wing nuts and the cup that holds the board down. If you can't send to New Zealand, I have a buddy in CA that you could send to. Cheers

If any of you are cutting up an old rust bucket, please I need a set of rear seat belt anchor plates for a 67-69, also my 2 cars are getting complete new trunk floor pans due to rust and previous butchery, so I need 2 spare tire hold down brackets for the spare well. Please please please...

Hi Guys. Anyone cutting up a rusty floor pan? I'm in need of a few parts. I've just become a dad, and i need to put seat belts in the back of my cars which have no anchor points, but I want it to look factory. I have gotten some anchors off another FABO member, but I need some more so I can...

Looking for a console lid, my one has a break and some holes drilled into it, and lock missing. I can probably repair it, but I'd prefer to start with a better piece. I don't care if it is the lock style or not. Need to be able to either post to New Zealand, or to Carson CA. Easiest if you take...

If you can send to CA or better still are located in CA that would be good. PayPal is easiest option for me, but not the only option. I don't mind minor dents, or what trim it has, but needs to be an original 69, and not one of the replacement fenders that came out in the 70's. Cheers

Looking for rear seat belt anchor plates, don't care what year, aslong as they are factory a-body. I have two cars with no rear seat belt anchors, now we have a kid I'm looking to make them a bit safer. I would like at least 8 so I can do both cars if possible. Does anyone know if they ever had...

Still looking for a rust free left fender, minor dents ok, needs to be able to be sent to Carson California, for shipping to New Zealand. May be interested in a left door too if the price is right. If you're in California I can possibly arrange for someone to pick up. Prefer to pay with...

Any body cutting up a 70's a-body with some good seat belt anchors? I'd like at least the four for the rear seats, I'm thinking of upgrading the seat belts in one of my 60's darts to retractors all around. Cars down here didn't require seat belts in the rear till 78, so factory anchors are hard...

Looking for a good rust free left/drivers fender, dont care what trim it has aslong as it is a 69 and still has the potmetal side marker bucket intact. A few small dents are ok, as I will have to weld trim holes probably anyway. I can't pickup, needs to be sent to Carson. Easiest for me if you...

These are a one year only style, and are not the same as 68 and later. I've been sent wrong ones before ](*,) Must be in black plastic, as per lower spec darts, valiants and cuda's. HELP PLEASE

Still looking for a pair of REAR armrest bases for a 67 dart. ](*,)These are NOT the same as as 68-72 style armrests, and I need black plastic ones to match my front, I don't require pads, just the bases. I've attached a picture of a red set of 67 armrests on eBay. Cheers.

Anyone got any rear armrests in black plastic for a 67 dart or 'cuda? I need some but have only come across chrome ones, I'd prefer not to have to paint some to match my front armrests. Prefer if you can post to New Zealand, but I have contacts in CA. Prefer to pay by paypal but let me know...

Want a pair of front 5 slot mags in the 4" bolt patern 14x6" or 5" even. Nothing too pricey or the wife will kill me. Need to send to a shipping company in CA, also would help if you accept paypal. I'd like to see a photo of what you have to see if I can match the rears I have. Cheers:burnout: