chargers777
Well-Known Member
- Joined
- Apr 21, 2007
- Messages
- 117
- Reaction score
- 3
Do they fit with power steering? Do they fit on both sides? Any clearance issues?
1967 383 log manifolds
- Thread starter chargers777
- Start date
-
Do they fit in "WHAT"?
chargers777
Well-Known Member
- Joined
- Apr 21, 2007
- Messages
- 117
- Reaction score
- 3
Well, if you're willing to make a few modifications, the good HP manifolds will fit.
chargers777
Well-Known Member
- Joined
- Apr 21, 2007
- Messages
- 117
- Reaction score
- 3
I already have the logs
Ok. They should fit better than the HPs then.
RRR ,
I have a 73 Swinger with a Slant ,and an automatic .
Next year I’m anticipating going to a low deck B with a 727 .
The only option this car has is power steering .
I was going to use headers ,,, but I really prefer a nice set of manifolds .
I already have the conversion mounts purchased from Schumacher .
Would manifolds fit alright with my power steering and clear everything ?
Tommy
I have a 73 Swinger with a Slant ,and an automatic .
Next year I’m anticipating going to a low deck B with a 727 .
The only option this car has is power steering .
I was going to use headers ,,, but I really prefer a nice set of manifolds .
I already have the conversion mounts purchased from Schumacher .
Would manifolds fit alright with my power steering and clear everything ?
Tommy
Pretty sure they fit, Tommy. You'll find you will have more and better answers if you create your own thread in the exhaust section, as not as many members will see your question here.
Okay ,,thanks man .
Tommy
Tommy
The log manifold will only work on the passenger side and it will be tight.
The HP is needed on the driver side.
He'll find out. LOL
If I remember correct I read somewhere a c-body manifold might work. I don't think it was a log.
picture borrowed from @1968rt . others that can help. @GTX JOHN , @pononamissel , @Jim Lusk and @oldkimmer many others too.
Correct. I think either one needs milling so the outlet is positioned closer to the block though.
Yes the 68/69 C body HP manifolds fit great with power steering in a 67-76 A body with a low deck. I angle milled the drivers side 1/16. I did see 1 74 dart sport with late 60s log manifolds. But didn’t pay too much attention to it. 383 auto. Kim
I had to angle mill the passenger side log manifold to fit my 69 Valiant
440 engine. C body Logs on both sides of engine.
440 engine. C body Logs on both sides of engine.
I never had to use logs so I can’t say. C body HPs were plentiful at the time. Kim
-
