gen2hemi
former ASE knuckle buster
- Joined
- Mar 15, 2010
- Messages
- 63
- Reaction score
- 1
Tore into the tail end to get the tail light panel, trunk extensions, and trunk extension caps out. I'm keeping the trunk floor loose until everything goes back together; it is easier to work underneath without it.
Continuing with the fabrication and welding tasks, here is pic of the Street Lynx bar welded in place. I had to fabricate some shims to close gap between the bracket and frame rails as the cars frame rails were over 1/8" wider than the Street Lynx.
Continuing with the fabrication and welding tasks, here is pic of the Street Lynx bar welded in place. I had to fabricate some shims to close gap between the bracket and frame rails as the cars frame rails were over 1/8" wider than the Street Lynx.