A-Body Round #2- My '76 Scamp restore...

Cudakid2967 · Aug 22, 2024

rich_mc said:
Cool. Def keep me posted on any success or lessons... Is there a thread here on your project?

I don't, I should make one, car has been through a lot over last couple years with combinations that have been in and out of it things we've done to it

TT5.9mag · Aug 23, 2024

if you use a stock slant distributor, locked out, you could probably use the vacuum advance plate to phase the rotor. Make the plate lockable and adjust, test, then lock it down.

rich_mc · Aug 23, 2024

TT5.9mag said:
if you use a stock slant distributor, locked out, you could probably use the vacuum advance plate to phase the rotor. Make the plate lockable and adjust, test, then lock it down.

Makes sense... I'll have to study that stock one I got as backup to see if I can figure out how much offset between rotor and mag pickup might be achievable.

rich_mc · Sunday at 3:50 PM

Great weekend! Drove down to Knoxville to participate in the Slant Six races. Awesome fun and a warm welcome from the group. The Scamp ran consistent 10.4X seconds in the eighth mile... I might be hooked now and want to work toward getting into the single digits...