That how Trade Shows usually roll DTM. They are introducing new products that aren't available yet.
AFR SBM Heads, Just got back from PRI
- Thread starter RAMM
- Start date
-
- Status
cookietruck
Well-Known Member
Dan the man
Well-Known Member
That's understandable. Wonder how expensive they will be
I’m sure anyone can find something with anyone’s work to improve or readdress to THERE liking.
SO! If I was your machinist I’d sell you un-needed work as well. LMAO
Ya, I think they saw me coming. lol I can't do that. I couldnt sleep.
Dan the man
Well-Known Member
You can figure that they will be close to 1,500 each
It’s possible! On your post and what I said. The question was asked if they are ready to bolt on. The answer is yes.
Anything after that is just ether splitting hairs or they find something their machinist, themselves etc….. did t like or wanted to improve on.
The head itself as is (CNC version) is ready to go OOTB. Mine were. Someone else’s? Maybe not so much. Stripping and checking the head from anyone in any state from in the raw to fully prepared and ported should be checked for aluminum dust, chips, and etc…. AKA, every aspect of the head and its machining.
If your machinist found an issue somewhere that was intolerable to be used as is then that is ether him or the parent company.
My question is, did you blindly OK the work or did you ask to be shown the inadequacies? Why does a brand new valve need to be polished? IDK myself, so, what was wrong with it since it’s brand spankin new? Was the valve seats poorly prepped? Did you ask to see how straight edge on the heads deck? What’s wrong with the supplied valve seals?
While anyone hear, actual machinist, home engine builder or stupid *** nud-nick rubber head idiot can come up with a list.
I took MY OWN straight edge to the sea I and intake mating surfaces. I removed the locks retainers and spring to check the valve stem fitment and checked spring heights with my mic. I did everything I could. When I blew compressed air through it, I got NOTHING coming out except air.
More I’d bet.
Dan the man
Well-Known Member
Probably.
Funny how you edited my post to not reflect me calling you as crooked as them. FWIW, I asked them to put in better seals as the seals on there where just OE type of stuff. I'm trying to build something nice. I would have posted any other problems.
Dan the man
Well-Known Member
They offer a new product and then make it so expensive that people won't buy it. They seem to want their R&D investment back all at once instead of being spread out over a few years. They have a good idea here, they should create a demand. Most engine builders want that 4" bore engine, well edelbrock offers a cylinder head specifically for the small bore small block chevy by them doing this they have create a demand for their product. I honestly believe that if a manufacturer would offer more cylinder heads, pistons for the sbm that people would take interest and in turn creating a demand. I don't remember the cost of the heads for the small bore chevy but it was affordable.
I can not edit anyone’s post. So you just exposed yourself as a lier!
LMAO!!!
Caught! Red handed!
Your a LIER!!!!
Again your covering (or poorly trying to cover) your *** by injecting new information and LIER LIER PANTS IN FIRE SINCE…
Promaxx doesn’t use stock style umbrella rubber seals but Viton seals like the style of valve seal Edelbrock uses.
The problem here is you paid your machinist for things you know nothing about and MAY have been taken for a ride. Then you lied about stuff there after trying to cover your ***.
Your busted!
Further more you have NO Refrerence in on base calling me crooked with the exception of my joke you twisted in your favor but I have just straightened out as such.
I also am not in the biz of selling, buying, refurbishing or modifying cylinder heads. So I can be a crook or crooked.
I don’t screw people over for money and I don’t outright steal money nor do I lie about others work, unlike yourself.
Your a lier and have no idea what your looking at but you are good at (most likely anyway as per your own post) throwing money out the window on unneeded useless work.
Did you know that your now supporting your dentists kids collage education?
This is the original quote you edited.
@rumblefish360 fish360 I'm done polluting RAMM's thread.
The below quote is what I said and I broke up your quote as to address it at a part of it at a time.
The below is what I said was a joke.
This was not edited out but broken up from one post into more easily read and addressed sections to directly address that very distinct section.
The word edited requires something to be missing from the post in which all the words you typed in are there and anything I broke up to focus on specifically was done still contains all the words of the original post.
Nothing was taken out of context. Just specifically addressed.
Don’t be a crybaby and split hairs. You just make yourself look foolish.
Good, crybaby assholes like yourself that can’t see a joke within the post aren’t needed and further more, your just a lier caught red handed In Which you cannot deflect from.
Let me rephrase. I'm done enabling you and your name calling junking up other peoples threads.
When I quoted that post, that of which is my reply post to that was unedited which means you must have edited the post shortly thereafter which will not show as edited because it was quickly done after you posted it.
Come on man! Having been a MOD here in the past and on this website before Joey purchased it from Adam I have learned a few things about how each system operates.
You’re a lier and have been busted several times now trying to call me a lier and messing with your posts. LMAO BRO!
You’ve been caught red handed again and again and again.
On top of that, you can’t see a joke coming from a mile away and inject your own voice and what you think my voice tone is delivering.
I could do the same. In fact, I think I will since it seems to fit perfectly!
Stop hopping in your seat with anger getting your blood pressure up turning red with rage. Obviously your off your meds again for your bipolar manic depression issues. Stop drinking heavy while posting because it shows up well when you lie so much about others and professional machinists at that, work they do.
It’s obvious you’re jealous and in a rage over being caught out there as a lier. Please don’t beat your cat again or kick your dog like you side in the other post when the group was talking about the withdrawal problems from hard drugs.
I do respect your ability to leave behind the drug usage that you were addicted to for decades though I think you leaving your wife and beating your kids isn’t a great thing. Much less having sex with the farms donkey. But hey! You do you!
I wish you luck in your upcoming child **** case and hope you ditched your computer with all of those images you said you had store on there with little boys and animal sex. Again, you do you.
Peace live and happiness where ever you end up which is probably life in prison. I hope you find Jesus in jail.
With regards, Rob
PS, Enjoy that BBC as much as possible. Myself and Jesus don’t approve by the way.
But on everyone else, please pray for the quoted individual above. He needs it badly.
Takes two to tango and I didn’t start dancing first nor will I opt out with a lier like yourself and be named for something I not only didn’t do but can not as I am not a MOD with the ability to do such actions you claim I did.
You truly are delusional and have a fragile ego and skin.
Please put down the drink and close out the keyboard tonight.
Last edited:
Thanks! LMAO
LOL! Sorry, shows over. The crybaby crap starting lier has left the thread.
- Status
-
