Martythetrimmer
Well-Known Member
bit of a brake from rust repairs.....some cosmetics for the tray wall.....
routed the Dodge logo into a piece of 12mm MDF and mounted a 3mm facia
![](http://i1245.photobucket.com/albums/gg586/martythetrimmer/DODGE%20UTE/TRAY/1_zpsyjr7fj93.jpg)
then mounted a 3mm backing board
![](http://i1245.photobucket.com/albums/gg586/martythetrimmer/DODGE%20UTE/TRAY/2_zpstpoqa8z9.jpg)
fibreglassed the beveled edge
![](http://i1245.photobucket.com/albums/gg586/martythetrimmer/DODGE%20UTE/TRAY/3_zpslk16nhsq.jpg)
screwed it to the removable tray wall and fitted to the frame
![](http://i1245.photobucket.com/albums/gg586/martythetrimmer/DODGE%20UTE/TRAY/4_zps5cicrelc.jpg)
a small LED light strip is mounted to the rear window support frame to light the tray
![](http://i1245.photobucket.com/albums/gg586/martythetrimmer/DODGE%20UTE/TRAY/5_zpsbnqvgyan.jpg)
lights the full length of the tray but there will be another light mounted into the hard cover I'm building
![](http://i1245.photobucket.com/albums/gg586/martythetrimmer/DODGE%20UTE/TRAY/6_zpsuawzqf7o.jpg)
the logo area will be covered in a mid green, while the lower section and the rest of the tray will have a dark green and black fleck low pile carpet
![](http://i1245.photobucket.com/albums/gg586/martythetrimmer/DODGE%20UTE/TRAY/7_zpscdw7sku6.jpg)
the sides for the new tray are now cut to size and have the 6 bondage......load, tie downs welded into place, rated at 500kg each they will hold more the the ute can carry!!
![](http://i1245.photobucket.com/albums/gg586/martythetrimmer/DODGE%20UTE/TRAY/8_zpsgrwmjy48.jpg)
routed the Dodge logo into a piece of 12mm MDF and mounted a 3mm facia
![](http://i1245.photobucket.com/albums/gg586/martythetrimmer/DODGE%20UTE/TRAY/1_zpsyjr7fj93.jpg)
then mounted a 3mm backing board
![](http://i1245.photobucket.com/albums/gg586/martythetrimmer/DODGE%20UTE/TRAY/2_zpstpoqa8z9.jpg)
fibreglassed the beveled edge
![](http://i1245.photobucket.com/albums/gg586/martythetrimmer/DODGE%20UTE/TRAY/3_zpslk16nhsq.jpg)
screwed it to the removable tray wall and fitted to the frame
![](http://i1245.photobucket.com/albums/gg586/martythetrimmer/DODGE%20UTE/TRAY/4_zps5cicrelc.jpg)
a small LED light strip is mounted to the rear window support frame to light the tray
![](http://i1245.photobucket.com/albums/gg586/martythetrimmer/DODGE%20UTE/TRAY/5_zpsbnqvgyan.jpg)
lights the full length of the tray but there will be another light mounted into the hard cover I'm building
![](http://i1245.photobucket.com/albums/gg586/martythetrimmer/DODGE%20UTE/TRAY/6_zpsuawzqf7o.jpg)
the logo area will be covered in a mid green, while the lower section and the rest of the tray will have a dark green and black fleck low pile carpet
![](http://i1245.photobucket.com/albums/gg586/martythetrimmer/DODGE%20UTE/TRAY/7_zpscdw7sku6.jpg)
the sides for the new tray are now cut to size and have the 6 bondage......load, tie downs welded into place, rated at 500kg each they will hold more the the ute can carry!!
![](http://i1245.photobucket.com/albums/gg586/martythetrimmer/DODGE%20UTE/TRAY/8_zpsgrwmjy48.jpg)