bob7four
Well-Known Member
Ok guys I have searched everywhere and cannot find anybody that fabricates seat tracks for a 69 Barracuda. I have one rusted out track that I don't think can be repaired. Any ideas?
Bucket Seat Track
- Thread starter bob7four
- Start date
-
44067gtdart
Well-Known Member
Not positive but possibly Mopar Plus?
512Stroker
We are all here because we are not all there.
Place a WANTED ad here on FABO
There are no reproductions available
Signing on.
Also, would anyone have a contact on refurbishing seat tracks, if we can find used ones?
Also, would anyone have a contact on refurbishing seat tracks, if we can find used ones?
hwd2
Well-Known Member
Hopefully nobody sells (you or me) damaged goods. Most a person should have to do is to work in plenty of lithium type grease into the sliding mechanism, inspect and lube cables and coil springs and of course the threaded studs that attach thru the floor. Clamp stationary part of each bracket in vise, etc., and work moving part back and forth. Note that the outside brackets (with adjust lever) are spring-loaded so be mindful of extra effort to extend those pieces. Sometimes the moving ball bearing partially embeds itself into the stationary bracket part but I've never had to refurbish or do anything major to any of my brackets over the past 50 years. Now, rust can be a different story.
Yes, supposing they're rusted, realize the process, but would like to find a place to send them. Looking for that "new" look.
Thats all.
Thanks
Thats all.
Thanks
I see quite a few tracks sold here. I would just start a wanted thread to find what you need.
bob7four
Well-Known Member
I posted a want ad weeks ago without any replies to date. Guess I have to wait it out or try to Fab a patch section where it is rusted out. Going to be difficult with all the bumps and depressions the original had fabricated into it.
-
