[FOR SALE] HP Head Liquidation.......................$150 pair
- Thread starter GTX JOHN
- Start date
-
- Status
What part of Texas are you in?
Going thru Okla City/Tulsa in a week or two. We might
be able to meet somewhere
Shipping would probably be too much to be worth buying
them (would guess 150 to 200 UPS)
Going thru Okla City/Tulsa in a week or two. We might
be able to meet somewhere
Shipping would probably be too much to be worth buying
them (would guess 150 to 200 UPS)
As soon as it cools down (Now 115 in the shade) I will go thru
the 24' trailer filled up to the roof from my very good friend and my engine
machinist. He passed a couple months ago and I am trying to sell 60 some years
accumulation of his huge shop. Probably several hundreds of thousands of parts
at retail. He has won more NHRA National Races and championship than I can count.
There are another 4 or 5 nice sets of 915 small block heads.
Mostly magged and carefully inspected by him. Many of the fastest
small block stockers all over the country (Including us) had their heads prepared by
him and he kept only the best for his customers.
Appreciate everyone's patience as I am elderly and in the middle of several eye surgeries and
can only lift 10 LBs according to my doctor without risk of permanent damage. I am really hopeful
of being able recover enough to race NHRA National Races for some more years if God is Gracious
in his blessing and mercy to me!.
Again, sorry for the delay.
the 24' trailer filled up to the roof from my very good friend and my engine
machinist. He passed a couple months ago and I am trying to sell 60 some years
accumulation of his huge shop. Probably several hundreds of thousands of parts
at retail. He has won more NHRA National Races and championship than I can count.
There are another 4 or 5 nice sets of 915 small block heads.
Mostly magged and carefully inspected by him. Many of the fastest
small block stockers all over the country (Including us) had their heads prepared by
him and he kept only the best for his customers.
Appreciate everyone's patience as I am elderly and in the middle of several eye surgeries and
can only lift 10 LBs according to my doctor without risk of permanent damage. I am really hopeful
of being able recover enough to race NHRA National Races for some more years if God is Gracious
in his blessing and mercy to me!.
Again, sorry for the delay.
JonnyB
Member
I’m in for a set of 2.02/1.6 j-heads if you’re passing through Oklahoma.
Sounds like I’m further south than your route but I can come north to meet you.
Maybe I can pick up a set for HSDemon while we’re at it as I’m not too far from him.
What big block stuff do you have left John?
I may have to take a "road trip"..lol.
John ,
Do you have any 340 blocks ?
Tommy
Do you have any 340 blocks ?
Tommy
I have currently eight left and they are sonic tested
excellent and mostly Hot Tanked/Magged/Acid washed
and inspected good. $750 if 030/040 $1250 to $1,450
if Standard/ 020. I would sell one or two of these.
I know that is not Junkyard prices but these are the best I
have found over the last 30 years. I went through a LOT of
blocks to find these.
excellent and mostly Hot Tanked/Magged/Acid washed
and inspected good. $750 if 030/040 $1250 to $1,450
if Standard/ 020. I would sell one or two of these.
I know that is not Junkyard prices but these are the best I
have found over the last 30 years. I went through a LOT of
blocks to find these.
That’s a good price,,,I’ll have to see what my friend wants to do,,,he’s leaning 318 .
Tommy
Tommy
John, I would also like a set of J, X, Z, or O heads with 2.02 intake valves along with those fenders.
All, John is supposed to meet up with me about some fiberglass fenders in central Oklahoma. I am 35 minutes east of Oklahoma City on I-40.
I am certainly willing to host whoever comes, @JonnyB or I can relay parts to you. My place is a pretty convenient stop for East/West I-40 travelers. Durant is 2 hours South.
@HSDemon I have family in Jefferson and would be happy to relay some parts to you. My aunt just passed and I did not get to go to her funeral. I'd like to see the cousins.
-John
Last edited:
I have another 50 heads still in the trailer to
unload from my good friend's engine shop who
passed away. Also some Max wedge stuff but irt
is still 100+ here and I just do not have the energy
Probably another 8000 Lbs by the way the enclosed
trailer is sagging!
unload from my good friend's engine shop who
passed away. Also some Max wedge stuff but irt
is still 100+ here and I just do not have the energy
Probably another 8000 Lbs by the way the enclosed
trailer is sagging!
I'm probably the only dude that'd ask for something most people would throw away... But, got any slant six stuff in there? My 225 has a busted off bolt and I'd rather just get another head and do a little work to it and swap it on.. Then, I can remove the busted bolt on the bench. I'm in Southern California and in no hurry..
- Status
-
