EdM
Well-Known Member
- Joined
- Sep 7, 2019
- Messages
- 438
- Reaction score
- 1,207
Mopar Performance crate 360.
Let's do it!!! Mopar Motor Monday!
- Thread starter MrJLR
- Start date
-
Yalls stuff looks a lot better than mine. lol
Dang......so tired nearly forgot!
My virgin 68 318 I'm gonna build to a stroker!
Sitting in my garage waiting for money!
Jeff
My virgin 68 318 I'm gonna build to a stroker!
Sitting in my garage waiting for money!
Jeff
DARTGAME
SuPeRcHaRgEd
Case of the munday’s
coloradohill
Well-Known Member
Hyper_pak
Old School Chrysler Fan
Seriously under construction!
Hey if that is a factory 1968 318, that will have the Valve Relief Flat Top pistons in it 9.2:1 compression right out of the factory in '68. Made 230 hp even with the 2bbl on it, put a 4 bbl on it and wake it right up.
I would be interested in those stock bore valve relief pistons if you really want to stroke your block. Thanks . . .
thesiren74
Well-Known Member
Mopar Motor Monday, here we go.
Put the valve train together on this '91 318 Roller engine I am building.
Primed the oil system, installed distributor drive gear, bolted down snd sealed the intake manifold, installed distributor. Puting the valve cover gaskets on tomorrow and bolt a coil onto the manifold and it is about ready for the engine run stand to fire it up.
So yeah have steel on hand here and next thing is to build up the engine run stand. Want to get them fired up, all tuned and dialed in on an engine run stand. Then they are ready to put to use.
Ready for Engine Run Stand Next
Put the valve train together on this '91 318 Roller engine I am building.
Primed the oil system, installed distributor drive gear, bolted down snd sealed the intake manifold, installed distributor. Puting the valve cover gaskets on tomorrow and bolt a coil onto the manifold and it is about ready for the engine run stand to fire it up.
So yeah have steel on hand here and next thing is to build up the engine run stand. Want to get them fired up, all tuned and dialed in on an engine run stand. Then they are ready to put to use.
Ready for Engine Run Stand Next
dibbons
Well-Known Member
Original '65 273 is asking to be freshened up a bit.
Slant six just took a bath.
Scraped about a pound of grease off.
Scraped about a pound of grease off.
pishta
I know I'm right....
That has WAY more cool stuff on it than mine does.
pishta
I know I'm right....
Been sayin' that for years!
j par
Well-hung Member
My junk...
What is the Red Mopar Small Block on the lower right ??
pishta
I know I'm right....
Just a little 'ol 273 with an Isky turbo grind cam and a sheet metal MPFI intake...nothin' special....
Pishta's sheet metal intake
Hyper_pak
Old School Chrysler Fan
Who bolts a 1 barrel Holley to a Clifford intake!!!!
pishta
I know I'm right....
Kicking this 6 around too.
Now I am glad I asked about that "Red Mopar Small Block".
Really like what you have done there. This is what Hot Rodding is all about.
Come up with a new idea, and see it through to make it work.
Thanks for posting this up !
470 stroker!!!
-
