Precision from Bull Shoals or Precision from New Hampton?I don't have the specs, I bought it here on FABO
I had the part number or whatnots, but I'd have to look it up.
Precision from Bull Shoals or Precision from New Hampton?I don't have the specs, I bought it here on FABO
I had the part number or whatnots, but I'd have to look it up.
[SOLD] - PTC 9.5 904 converterPrecision from Bull Shoals or Precision from New Hampton?
That was a great deal. PTC makes good converters.
I have an open 3.55 center section to put in it, but I'd like a sure grip, maybe 4.10's. I will borrow the drag radials from the other Duster.It will be interesting to see how things work out at the track. It sure sounds good leaving. I'm thinking a 3.55 or better with a Sure Grip might be the next thing on the list. THen you'll need slicks to get it to hook. It never ends!
The way that sounds leaving now, I'd think 4.10 would be minimum. I "bet" it would even respond to 4.30s or even 4.56s. It sounds really good.I have an open 3.55 center section to put in it, but I'd like a sure grip, maybe 4.10's. I will borrow the drag radials from the other Duster.
Yeah, I'll see what shows up locally (and reasonably priced...lol) before opening day!The way that sounds leaving now, I'd think 4.10 would be minimum. I "bet" it would even respond to 4.30s or even 4.56s. It sounds really good.
I can relate to that. Good luck and keep us posted!Yeah, I'll see what shows up locally (and reasonably priced...lol) before opening day!
As long as you don't run out of rpm with the 4.10's. You run 1/8th mile?I have an open 3.55 center section to put in it, but I'd like a sure grip, maybe 4.10's. I will borrow the drag radials from the other Duster.
Cordova is a 1/4 mile track..... but occasionally they run only 1/8th for certain races. Thing is, they charge the same full price for only half the track!!!!!As long as you don't run out of rpm with the 4.10's. You run 1/8th mile?
1/8th is easier on equipment but 1/4 is more fun.Cordova is a 1/4 mile track..... but occasionally they run only 1/8th for certain races. Thing is, they charge the same full price for only half the track!!!!!
Cordova is a couple hours away. Just sayin'. I need to make a trip.Cordova is a 1/4 mile track..... but occasionally they run only 1/8th for certain races. Thing is, they charge the same full price for only half the track!!!!!
Get Er' Done!Low Dollar 318 is locked, cocked, and ready to give it's all on April 20th. Will the 48 year old smog 318 hold together after all the beatings it has taken for a Grand Fanale? This engine is the Genesis of 318willrun channel. This engine has inspired dozens and dozens of home builders, the private messages and posts on Forabodiesonly, the emails and comments/questions on youtube - all directly from this little 318. You have my commitment to do my best to allow the 318 to shake, rattle and row! I hope those that been here from 2016, the birth of the Low Dollar 318, will enjoy seeing it get it's chance, finally, to dance! Remember, it was the Low Dollar 318 before 318's were ever cool !!!
26" tires, either set is dot approved. Couldn't land the 4.10's, so were using the 3.55 open. There already in the car. Out of time, but the car is basically ready.How tall are the tires?
4.30s and 4.56s are to much gear unless 1/8 mile only
4.10s or 3.91 depending on tire height
I thought you were running street tires?
Back to back street tires vs drag radials would be interesting
RACES CANCELED TODAY DUE TO THE COLD WEATHER. BUMMER.Low Dollar 318 is locked, cocked, and ready to give it's all on April 20th.
There were a few 'teeners that ran good back in the '80's & early'90's, all low buck 'cause We didn't have much buck to use, & there are a couple of locals that do the tri-state demo-derby rounds that still transplant 'teeners into whatever body they get to use.Low Dollar 318 is locked, cocked, and ready to give it's all on April 20th. Will the 48 year old smog 318 hold together after all the beatings it has taken for a Grand Fanale? This engine is the Genesis of 318willrun channel. This engine has inspired dozens and dozens of home builders, the private messages and posts on Forabodiesonly, the emails and comments/questions on youtube - all directly from this little 318. You have my commitment to do my best to allow the 318 to shake, rattle and row! I hope those that been here from 2016, the birth of the Low Dollar 318, will enjoy seeing it get it's chance, finally, to dance! Remember, it was the Low Dollar 318 before 318's were ever cool !!!
Any updates as to when will the teener make it’s grand finale?RACES CANCELED TODAY DUE TO THE COLD WEATHER. BUMMER.
NEW DATE IS 4-27-24
View attachment 1716239107
We have had a sudden circumstance that was out of our control pop up and I'm afraid it looks as if cars will take a back seat for a minute or three.Any updates as to when will the teener make it’s grand finale?
I hope it's not too bad.We have had a sudden circumstance that was out of our control pop up and I'm afraid it looks as if cars will take a back seat for a minute or three.
Thank you. It's just as of now (and I have no idea how long) just about all our time has been diverted due to unfortunate circumstances. It will work itself out eventually.I hope it's not too bad.
I hate rough patches, I've gone through plenty in my life.
Thoughts & prayers to You & Yours, whatever You're dealin' with, hang in there Brother...Thank you. It's just as of now (and I have no idea how long) just about all our time has been diverted due to unfortunate circumstances. It will work itself out eventually.
Let it all hang out, brother. 4.30 and a converter that'll flash 4500. ...and put the headers on it.
One last thing. Between now and then, cut back on the biscuits.