Mopar Muscle induction Extravaganza Dyno testing SBM intakes, comparison....

-
Brooks James said:
For its age and used in that era, does a mildly ported Torker flowing 236 at .500 suck?
Those are the specs on a friends car

I want a Torker for 2 reasons.
I'm using 70's speed parts on my car.
70's Torker were widely known. I love the design.

Secondly, I will be using 360 mag heads drilled for LA pattern for the Torker.

The CH318A Magnum as cast heads flow .227 @ .500

I'm very secure that this will be a good combo after I clean up the Mag heads , I'm hoping this will be enuff for 450 HP after all

Something is worth more to someone w one who desires it
Click to expand...

Your second paragraph says it all. It’s your engine in your car. That intake is certainly period correct.

If that’s what you are going for then by all means use it.

It will do what you want it to and work. Lots of guys used them back in the day.

I say go for it.
 
Brooks James said:
For its age and used in that era, does a mildly ported Torker flowing 236 at .500 suck?
Those are the specs on a friends car

I want a Torker for 2 reasons.
I'm using 70's speed parts on my car.
70's Torker were widely known. I love the design.

Secondly, I will be using 360 mag heads drilled for LA pattern for the Torker.

The CH318A Magnum as cast heads flow .227 @ .500

I'm very secure that this will be a good combo after I clean up the Mag heads , I'm hoping this will be enuff for 450 HP after all

Something is worth more to someone w one who desires it
Click to expand...
It definitely has the look. You should be able to find one for cheap too.
 
Brooks James said:
For its age and used in that era, does a mildly ported Torker flowing 236 at .500 suck?
Those are the specs on a friends car

I want a Torker for 2 reasons.
I'm using 70's speed parts on my car.
70's Torker were widely known. I love the design.

Secondly, I will be using 360 mag heads drilled for LA pattern for the Torker.

The CH318A Magnum as cast heads flow .227 @ .500

I'm very secure that this will be a good combo after I clean up the Mag heads , I'm hoping this will be enuff for 450 HP after all

Something is worth more to someone w one who desires it
Click to expand...

mopowers said:
It definitely has the look. You should be able to find one for cheap too.
Click to expand...
65Valiant529
mopowers said:
It definitely has the look. You should be able to find one for cheap too.
Click to expand...
Torker on the way from @66Valiant528
Very reasonable price
Thank you
 
Killer6 said:
Torker II didn't appear until '80's bro....& more resembled a Holley Street Dominator, which resembled a slightly lower Offy Port-O-Sonic, which is a bit lower than a Holley Strip Dominator......
Click to expand...
Killer6 back in the day a had a SBM Offy Super Sonic. Have you ever seen one of them?
 
pittsburghracer said:
When I get a chance I’ll throw the Ugly Torquer on a better flowing set of heads I have sitting here. I might have an M1 coming for my sons car.
Click to expand...
Ugly Torker, ? it's totally symmetrical
Well, all 9st

PXL_20241008_212741858.jpg
 
pittsburghracer , there is a rumor of you passing ? what up with that ? you posted here at 11:11 est today
 
tvt59 said:
It's a intake designed for a 4500 series carb. And it doesn't have the dividers in the intake runners.
Click to expand...
After posting that, I saw the difference on the Olds versions, that should have some top-end potential.
 
You must log in or register to reply here.
-

Back
Top