Red Headed Stepchild-75 Swinger LSX Swap
- Thread starter SwingerLSX75
- Start date
-
SwingerLSX75
Well-Known Member
Like driving a Cadillac. Now I have to best my 8.5 at 155 run with a lot less boost pressure .
SwingerLSX75
Well-Known Member
I tried a 4 magent one. I'm looking at the 12 magnet innovators west one. Friends with similar issues solved their problems with that one.
SwingerLSX75
Well-Known Member
SwingerLSX75
Well-Known Member
After a call the other day, I've been invited to run with the Drag n Drive shootout guys at the NHRA Northwest Nationals next week. We will be conducting the 160 mile drive portion on Thursday, qualifying passes/tnt Friday, and then elimination rounds will be starting after lunch Saturday, and then finals on Sunday afternoon. Single elimination and will be broadcast with the rest of the NHRA event. To say I'm excited is a heck of an understandment. Time to put in for some PTO and do oil change/maintenance on the dart and get ready to camp at the race track next week.
Good luck!
Nice to see you getting some recognition for your hard work.
Nice to see you getting some recognition for your hard work.
SwingerLSX75
Well-Known Member
Sorry been busy as heck after nationals and trying to get the house sold to come back east soon.
Nationals was a absolute blast with the drag and drive guys. Despite the treatment we got by the NHRA after one guy's brand new 10k motor blew about half track and spilled a little oil that came out of the belly pan they had looked at and given him the thumbs up on.
Thursday was the 165 mile drive from Pacific raceways up to Xtreme Speed shop, up to Chinook pass and back around a few other stops to the Fan fest in Kent. Then we headed back to the track after that for racing to start Friday. I had the tabs on my aluminum trans over flow can break during the drive but luckily wasn't anything serious, and Scott Speelman was awesome enough to take it back to his place and weld it back up for me and drop it off right before Q1 on Friday.
Q1 and Q2 on Friday I had some issues with the crank synchro error again after everything had just gone perfectly fine at the previous test and tune and it went 8.9 on low boost. So I think my best pass of the weekend was 10.0 at 148 after having to do some pedaling. Wasn't really able to go very fast with that error causing the car to lose power twice each pass. With as strict as they were the whole group of drag and drive guys turned into 8.5 1/4 mile bracket cars with the exception of the two who had 6.0 and 7.5 certs. Which kind of took the wind out of everyone's sails and limited the show we could put on for the fans. We had plenty of the pro teams and mechanics come over and were loving the cars and had some great conversations with them. The only people we had issues with the entire weekend were some of the bracket racers who were complaining about how the NHRA had brought us in to help get people in the seats. Mainly complaints and hate about how we didn't belong there because they paid lots of money to race there and we didn't. Had they paid any attention to the attendance for the NHRA, its been falling off because not everyone wants to come see a bunch of 10.90-11.1 throttle stop cars do bracket racing. There are fans for those yes, but as recent years have show there are more fans at drag and drive and no prep events than there are at most NHRA races. So bringing a larger variety to these events will help keep the sport and the interest alive so it doesn't die off where it is.
Despite all of the negative the positives from the weekend, to include sleeping in my enclosed at the track all week was awesome. The organizer on our end Donovan Linwood and his wife Marissa did an awesome job making sure everyone stayed fed each morning and evening and even had ice cream for us at the track for those crazy hot afternoons and evenings. Picture flood coming as well as a few videos. Now to get everything packed up and moved back east so I can get the motor out of the car and get that reluctor wheel issue checked out and check the thrust bearing as well. I don't want to have any doubts on issues when this thing goes back in. Then il be coming up to see you guys at Carlisle. I also have the coastal Virginia Auto Show in November too, and hopefully Dig or Die in December at Rockingham.
Nationals was a absolute blast with the drag and drive guys. Despite the treatment we got by the NHRA after one guy's brand new 10k motor blew about half track and spilled a little oil that came out of the belly pan they had looked at and given him the thumbs up on.
Thursday was the 165 mile drive from Pacific raceways up to Xtreme Speed shop, up to Chinook pass and back around a few other stops to the Fan fest in Kent. Then we headed back to the track after that for racing to start Friday. I had the tabs on my aluminum trans over flow can break during the drive but luckily wasn't anything serious, and Scott Speelman was awesome enough to take it back to his place and weld it back up for me and drop it off right before Q1 on Friday.
Q1 and Q2 on Friday I had some issues with the crank synchro error again after everything had just gone perfectly fine at the previous test and tune and it went 8.9 on low boost. So I think my best pass of the weekend was 10.0 at 148 after having to do some pedaling. Wasn't really able to go very fast with that error causing the car to lose power twice each pass. With as strict as they were the whole group of drag and drive guys turned into 8.5 1/4 mile bracket cars with the exception of the two who had 6.0 and 7.5 certs. Which kind of took the wind out of everyone's sails and limited the show we could put on for the fans. We had plenty of the pro teams and mechanics come over and were loving the cars and had some great conversations with them. The only people we had issues with the entire weekend were some of the bracket racers who were complaining about how the NHRA had brought us in to help get people in the seats. Mainly complaints and hate about how we didn't belong there because they paid lots of money to race there and we didn't. Had they paid any attention to the attendance for the NHRA, its been falling off because not everyone wants to come see a bunch of 10.90-11.1 throttle stop cars do bracket racing. There are fans for those yes, but as recent years have show there are more fans at drag and drive and no prep events than there are at most NHRA races. So bringing a larger variety to these events will help keep the sport and the interest alive so it doesn't die off where it is.
Despite all of the negative the positives from the weekend, to include sleeping in my enclosed at the track all week was awesome. The organizer on our end Donovan Linwood and his wife Marissa did an awesome job making sure everyone stayed fed each morning and evening and even had ice cream for us at the track for those crazy hot afternoons and evenings. Picture flood coming as well as a few videos. Now to get everything packed up and moved back east so I can get the motor out of the car and get that reluctor wheel issue checked out and check the thrust bearing as well. I don't want to have any doubts on issues when this thing goes back in. Then il be coming up to see you guys at Carlisle. I also have the coastal Virginia Auto Show in November too, and hopefully Dig or Die in December at Rockingham.
Last edited:
SwingerLSX75
Well-Known Member
Picture update post 2.
SwingerLSX75
Well-Known Member
Picture update 3 from Nationals.
Thanks for sharing your pictures and experiences with us. I love the fact that you are out and driving this car, enjoying it as it was meant to be. It's really a shame that the electronic gremlins keep you from getting a chance to show just how potent this combination is. I hope you can find it and eliminate it for good soon.
Curious about why you are moving back east?
Curious about why you are moving back east?
SwingerLSX75
Well-Known Member
US Navy Life is why. I'm retired Navy but my wife is still active duty. We Finished a 3 yr tour here and my wife was requested back in VA for her new command so they're moving us back.
I understand, and thank you both for your service.
hcallaway
Well-Known Member
Thanks for your service, both of you. I hope to see you in person. I hope you post if you have any events when you get back to Virginia!!! I get to VB several times a week.
Your dart is amazing!
Your dart is amazing!
SwingerLSX75
Well-Known Member
Absolutely will do. Once I plan to get up to VMP before the season ends up there. Just have to find our what events are left when I get the sync loss issue fixed after I get back. It sucks Richmond shut down a few years ago as well. I'll be running down at Hertford, and Coastal carolina and maybe even Kinston, NC too. Coastal VA auto show is November 22-24 and it'll be on display inside there for that as well.
SwingerLSX75
Well-Known Member
Well everyone we are back on the east coast. We close on the house the 25th. I pulled the rear wheels off while I'm waiting and sent them off to rc comp to have them machined for beadlock rings.
Jeez, I just figured out you were in Washington and now you're gone.
The car is awesome, good luck.
SwingerLSX75
Well-Known Member
Sorry man, the Navy calls.
I ordered up some new slicks, a new driveshaft speed sensor and got some other things in the works for the winter. Plan currently is the Coastal VA auto show in November and then Dig or Die on the back half of Rockingham December 6-7 to do some no prep racing with the extreme street guys.
Thanks for the update and new pictures. Beautiful scenery!
SwingerLSX75
Well-Known Member
Well we got all settled and moved. I have sent my wheels off to rc comp and they're now beadlocked. I alsi ordered up some slicks for some no prep racing in December 6-7 on the back half at Rockingham. But then I saw this flyer so I think I'll put the radials back on and go down there for some king of the street action November 16th. Them i have the coastal Virginia Auto show the November 21-22nd weekend.
SwingerLSX75
Well-Known Member
Well it turns out they won't let me run against the king of the street guys because I have an LS. The whole event is mopar bodied rules except apparently that one class.
So I decided to go ahead and tear the motor down and refresh it all. As well as swapping the 24x reluctor that has moved. Going to a 58x reluctor on the crank and tack welding it in place this time. Also going to a 4x reluctor on the camshaft as well. Having them check over and polish the crank as well.
I didn't like the look of the bearing so I'll be hit tanking it, cleaning out all the oil galleys and replacing the main and rod bearings as well as throwing in a new set of rings as it goes back together.
So for now she's tucked away. Hoping g to have her back up within the next two weeks.
So I decided to go ahead and tear the motor down and refresh it all. As well as swapping the 24x reluctor that has moved. Going to a 58x reluctor on the crank and tack welding it in place this time. Also going to a 4x reluctor on the camshaft as well. Having them check over and polish the crank as well.
I didn't like the look of the bearing so I'll be hit tanking it, cleaning out all the oil galleys and replacing the main and rod bearings as well as throwing in a new set of rings as it goes back together.
So for now she's tucked away. Hoping g to have her back up within the next two weeks.
SwingerLSX75
Well-Known Member
Man oh man has it been a busy one.
Where to begin....
After doing a once over on everything with the machine shop, I decided to go ahead and hot tank the block, run a hone through the cylinders. They doubled checked the deck just to be sure. He is turning the crank slightly to make sure everything is good to go, and I have all new 10 thou undersized rod and main bearings going in. New cam bearings just because we're already in there. I have a new Melling high volume oil pump to put in and decided to opt for a new set of Wiseco pro series pistons seeing as new total seal rings for the ones i have was about $515 which is half the price of new pistons anyway. Everything is going to be rebalanced together before going back together.
Going to be a tight window to make COVA Auto Show at the Virginia Beach convention center November 21-23 but I think it'll be good to go now that they're going to assemble the short block and I can finish the rest myself.
After that, I have the back half race Dig or Die Christmas Clash down at Rockingham, NC December 6-8. Most likely for me though should only be racing the 6th in the extreme street class.
Where to begin....
After doing a once over on everything with the machine shop, I decided to go ahead and hot tank the block, run a hone through the cylinders. They doubled checked the deck just to be sure. He is turning the crank slightly to make sure everything is good to go, and I have all new 10 thou undersized rod and main bearings going in. New cam bearings just because we're already in there. I have a new Melling high volume oil pump to put in and decided to opt for a new set of Wiseco pro series pistons seeing as new total seal rings for the ones i have was about $515 which is half the price of new pistons anyway. Everything is going to be rebalanced together before going back together.
Going to be a tight window to make COVA Auto Show at the Virginia Beach convention center November 21-23 but I think it'll be good to go now that they're going to assemble the short block and I can finish the rest myself.
After that, I have the back half race Dig or Die Christmas Clash down at Rockingham, NC December 6-8. Most likely for me though should only be racing the 6th in the extreme street class.
Last edited:
hcallaway
Well-Known Member
Looking at the pistons what was causing them to need to be replaced? Was a serious problem developing? I don’t think I could handle being on top of everything that can go wrong. Plenty of credit to those like yourself!!
SwingerLSX75
Well-Known Member
Well ingot her picked back up from Gregory's, got her taken home and reassembled and now she's back in place with o ky a few things left to finish it off tomorrow and then she will be ready for the Coastal Virignia Auto Show this weekend.
Then Dexwmebr 6-7th ill be running extreme street at Rockingham for Dig or Die.
Then Dexwmebr 6-7th ill be running extreme street at Rockingham for Dig or Die.
-
