Show off your small block.

-
My peewee 340

image.png
 
toolmanmike said:
Looks good! Clean look. I'm really leaning towards painting my Edelbrock light blue for a stock look.
Click to expand...

Thanks! I was shooting for a stock look, even if the motor really isn't stock. Now that I am working on going EFI, don't think I will be able to maintain that look.
 
image.jpeg
harrisonm said:
Does the hood close on that 6 Pack without a scoop? I was thinking on doing that to my 69 Barracuda, but I want the stock hood to close.
Click to expand...
Yes. However I had to trim the hood braces and the back of the hood brace. I also had to trim the air filter. If I used mopars air cleaner I would not have to trim anything. But I used a Mr. Norms air cleaner. Yes it's a stock hood.
 
lol sorry my thumb must have hit the button when scrolling..opps. yes all very nice!
 
1Fast340 said:
There is alot of good looking enginecompartments in this thread!
Click to expand...
And I'm glad I started the thread. There is a lot of different combinations so far. Keep em' coming guys!
 
Last winters project.... the low dollar 318. Getting it going last spring...
 
Ben Drinkin said:
I want to paint it, but it's a Leanna powdercoat masterpiece. Seems sacrilege to put paint on it. I have no excuse for the water pump but laziness..
Click to expand...

I don't recognize that motor Ben. I don't believe it had anything to do with me, but I like the way you think. LOL!!!
 
Building two of these 408 Stroker 5.9 Magnums with Enginequest heads and Hughes Hyd Roller cams for my 27' Magnum Marine boat
D50A46B1-F29B-4977-A383-DF606E916EBB_zpsisgtwaah.jpg

01E8F6FD-54E6-409D-BAAD-DD9E1518A747_zpsehg5k2kb.jpg

998D186A-B5CD-47AF-AA19-EE6CD6293ED8_zpsh5ymurih.jpg

A4B5E2D8-BE91-46AD-B54D-38F25CA3539E_zpsm8thrmuv.jpg


And collecting parts for a Poly 318 to go into my 21 Dodge Lakes speedster
829EE046-B016-45A7-B5B5-D0F2A89AED9B_zpsmp0b4bm4.jpg

33A3517E-C476-401E-955B-A772E5F98867_zpstbri2c1b.jpg


D50A46B1-F29B-4977-A383-DF606E916EBB_zpsj0oi95ob.jpg


D50A46B1-F29B-4977-A383-DF606E916EBB_zpsisgtwaah.jpg
 
ir3333 said:
Just looked at a Hot Rod 318 poly build..stroked to 402 it made 547hp and 566 ft.lbs​
Click to expand...

Yeah the Poly blocks can be bored over .100 and still have good wall thickness, along with a stroker crank you can build a big inch motor, and the heads are decent to work with. THis one is going to be mild with the 3 Holley 94s, some lakes headers, a mild cam and some mild porting on the heads with 9 to 1 compression
 
here is a pair of 318's, an LA and a Magnum I have sitting in the storage shed.... never know :D

DSCN0842.JPG
 
You must log in or register to reply here.
-

Back
Top