Show Your Big Block A body!

[dusterdragracer]

Nice Dart, here is my BB Valiant I just sold.....

 

[Louc60]

To all-My friend Tony's Dart is featured in the Feb 2014 edition of Hemmings Muscle Machine.It will be at the Detroit Autorama in March.

 

[Ohio Joe]

Why will only one picture load, I have tried everything!

 

[bOb shingler]

they won't load if you don't have tires on your hotrod.

 

[cuda20]

Lol.

 

[JJUSE67GTS]

Nice!!

 

[Ohio Joe]

Maybe if I put a motor in it do you think it would help?

 

[Big hp demon]

496 cubic inch,all steel full interior,though exhaust, on a et street tire. 1.47 sixty foot, consistent low 10.20's @ mid 130

 

[74DartSwinger360]

73 Duster with Factory paint and very rust free except part of trunk lip
440 is sitting on custom mounts and an unmodified Small Block Spool Mount K Frame
Just need to get some Schumacher or TTI Headers and can fire her up
Gonna make it into a nice cruiser and leave the body as is for now

 

[Downtime!]

Guess I missed this thread too.

1972 Scamp, fully restified, late model 440, 727 and a 9". Sassy Frass and sitting on cop wheels.

 

[Dart_Vader]

Here's my '70 with a '67 383, 727, 3:23's (for now) and shorty headers.

 

[mopardart44067]

My start to a new adventure

 

[pooryorick66]

I just bought. I don't have any history on it. All I know is its a 440, console auto, mini tubed, header dumps, and 391 gears. Thanks for looking.

 

[DustedUBad]

View attachment toysfortots.jpg

View attachment halos.jpg

View attachment 70s style.jpg

View attachment challyduster.jpg

View attachment IMG_0866.jpg

 

[MOPARMITCH]

Here.

 

[mopar65]

View attachment 1714785742

View attachment 1714785743

View attachment 1714785744

View attachment 1714785745

View attachment 1714785746

good looking 72 duster you have. what size wheel tire and back spacing are you running and did you do any rear end work? i mean like Minni tube or move the springs in to get them to fit? thanks Mopar65

 

[jamesdart]

my sleeper, 431, 727, dana 60. full street trim, 11.81@112. 10 years of owning it, the sleeper theme got kind of old, should have paint by the end of august.

and this one with the 400 and t56

 

[DustedUBad]

good looking 72 duster you have. what size wheel tire and back spacing are you running and did you do any rear end work? i mean like Minni tube or move the springs in to get them to fit? thanks Mopar65

Its running L60-15 Mickey Thompson Sportsmans, I don't know the back spacing, I bought the car that way, but I do know I has too much backspacing, I have to run air shocks to keep the car from rubbing the lip on the quarters, I plan to relocate the leaf springs, mini-tub it and run some a cal-trac set up or something, I thought about going 4 link from Unlawful, but for 4 grand I am just thinking about sticking with a stock style set-up. Its got a good old school look don't get me wrong, but for drag racing, once a clear up some room on the back side of the wheels they are gone, I am going to order some new wheels and tuck them up under to car better, and run a wider tire. I like the look of the Alumastar 2.0s in Black, and throw some Mickey Thompson E/Ts on it. Time will tell lol, I will probably just go cheap on the wheels and reorder a prostar with less back spacing, and toss the sportsmans.

 

[mopar65]

Its running L60-15 Mickey Thompson Sportsmans, I don't know the back spacing, I bought the car that way, but I do know I has too much backspacing, I have to run air shocks to keep the car from rubbing the lip on the quarters, I plan to relocate the leaf springs, mini-tub it and run some a cal-trac set up or something, I thought about going 4 link from Unlawful, but for 4 grand I am just thinking about sticking with a stock style set-up. Its got a good old school look don't get me wrong, but for drag racing, once a clear up some room on the back side of the wheels they are gone, I am going to order some new wheels and tuck them up under to car better, and run a wider tire. I like the look of the Alumastar 2.0s in Black, and throw some Mickey Thompson E/Ts on it. Time will tell lol, I will probably just go cheap on the wheels and reorder a prostar with less back spacing, and toss the sportsmans.

well its hard to see in the pic but to me they look like they only have around 3 inches of back spacing that is if they are a 15x10 wheel. If you can get me the measurements i might be interested in trading wheels? i have some weld pro stars that are 15x10 with 6.5 inches of back spacing. i know with these wheel and if you move your springs in 3 inches , you can run a M/T 29.5x11.5x15 slick. that's what my buddy had on his 1973 dart sport.

 

[mopar65]

Guess I missed this thread too.

1972 Scamp, fully restified, late model 440, 727 and a 9". Sassy Frass and sitting on cop wheels.

hey that's a very nice looking car you have also. if it wasn't for another 73 duster running around the town i live in that is the color i was going to paint my duster.

 

[DustedUBad]

well its hard to see in the pic but to me they look like they only have around 3 inches of back spacing that is if they are a 15x10 wheel. If you can get me the measurements i might be interested in trading wheels? i have some weld pro stars that are 15x10 with 6.5 inches of back spacing. i know with these wheel and if you move your springs in 3 inches , you can run a M/T 29.5x11.5x15 slick. that's what my buddy had on his 1973 dart sport.

To be honest it will be awhile before I get to tackle putting that job together, I am in the process of redoing a truck and have to get it done, as it is what is going to pull my duster to the track. So my main priority is spending all my cash into it, and it probably be late spring or early summer before I get it done. If you still have them after that time, we might can talk, or you decide to sell, but right now I couldn't really do it and wouldn't want to leave the car on jack stands lol.

 

[MikeD]

Here's mine.

 

[75dart se]

Grandmas car!

 

[75dart se]

Grandmas car

 

[360Duster75]

My 74 440 Duster picked it up this past Saturday.