zkx14
Duster De-ruster
he said breast
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
De-nippled I hope!
Some great videos on that.
Plumber was here for some vehicle repairs, it now has heat like it was new and loose connection on battery solved flickering headlight issue.
He was after some different wheels for his 39 dodge and wanted to try a pt cruiser wheel.
Ah-ha! Now i got him where i want.
He’s going to plumb in my tub/shower as soon as i have it ready. Frickin awesome!
He was after some different wheels for his 39 dodge and wanted to try a pt cruiser wheel.
Ah-ha! Now i got him where i want.
He’s going to plumb in my tub/shower as soon as i have it ready. Frickin awesome!
Picture please. Where it mounts to stud. Thanks.
- Joined
- Mar 17, 2018
- Messages
- 14,814
- Reaction score
- 34,638
I am guinea pig for sound abatement project this afternoon. That means I get to nestle in behind a 300 Win Mag while the boys take DB measurements so we can compare to baseline. We modified stations with a bunch of sound abatement material. Today we will see just how much we knocked off.
If they are that stuck they could use some WD40. Try it on the pivots too. They may not need springs just seized up.
I think I found the problem. Look at the pics, that spring tab to release the blad is laying against the metal on the blade. I bent the end of the arm a bit, and the problem seems to be gone.
Bill
Bill
Last edited:
good afternoon coffee peeps
The Hotz brand coffee was pretty good this morning.
The Hotz brand coffee was pretty good this morning.
The pivots are loose and fine, but I could not help myself so I had to lubricate them a little with the famous American 1-2-3 oil.
Oh I love that old stuff, we used to have it in Norway too, all the way back in the 70ties and 60ties. Anyway, it seems it is fine now since I bent the end of the arm a little. And I do like the new blades, they look awesome instead of a black blade.Bill
- Joined
- Mar 17, 2018
- Messages
- 14,814
- Reaction score
- 34,638
You guys and one gal have saved me some serious therapy bills of late with my painter issue. Hah! So here are some pix from today. I knew he was a genuine good guy deep down. I think he just got scrambled on priority.
I love wild, I have been out for hours in just my T-shirt, and it is 50 and windy, but the wind hit the back of the garage so it does not blow into the door. Was at the store too, and people around looked like a tamale, completely tucked in. I was surprised they did not come to the store in their beds.
Got the edge of the metal around the trunk opening welded, it was cracked open to I could not mount the trunk lid seal. Now that is welded, I have sprayed primer on, and I have mounted most of the seal, just where I welded that is open. And the trunk lid felt so nice to slam down now that the seal was there.
So, I have not been an entirely bad boy today.
Bill
Oh, hm... well, I had more than the T-shirt on, I had underwear, pants, socks and shoes on too.
Last edited:
Seems like the latch is missing, its at the end away from hinge side. A little pick and a pry and it would come off. Think my 65 barracuda should be similar,will check. If i can find them that is..
good you got it wiping for now.
dukeboy440
Well-Known Member
Make sure it isn’t a rushed job though either
Awesome!
Unconventional
Well-Known Member
From El Toro to Woodland hills it was pretty soggy, but the traffic was not too bad. The rest of the trip north to home was pretty much dry. Fire in Santa Barbara must have been subdued, I saw many loaner fire crews heading home for the holiday
.
Ddaddy
Just doing what I do
And while some may just say no to drugs, remember everyone should always...
Unconventional
Well-Known Member
http://r.search.aol.com/_ylt=Awr9NVXfB99dpQsAyVlnCWVH;_ylu=X3oDMTByYXI3cnIwBHNlYwNzcgRzbGsDdmlkBHZ0aWQDBGdwb3MDNA--/RV=2/RE=1574926431/RO=11/RU=https://www.ispot.tv/ad/75Zy/red-bull-the-story-of-thanksgiving/RK=0/RS=20hKzRjOCG8w.R1MmbszLUr01sY-
Red Bull advertisement
And of course it won't function. Ratz!
Red Bull advertisement
And of course it won't function. Ratz!
Unconventional
Well-Known Member
My shoes I ordered on NOV. 2 from company called wish came today.
The package has a clear China stamp.
The shoes are nice and good quality BUT ..... they REEK of some kind of chemical smell.
Also they are too big and there isn't much I can do for returns.
RESIST the temptation to order from the Chinese. I would have been money and time ahead ordering from a US stocked store. Although this particular model of shoe is not really around except from Chinese retailers.
Now I have some very cute shoes that are unusable.
The package has a clear China stamp.
The shoes are nice and good quality BUT ..... they REEK of some kind of chemical smell.
Also they are too big and there isn't much I can do for returns.
RESIST the temptation to order from the Chinese. I would have been money and time ahead ordering from a US stocked store. Although this particular model of shoe is not really around except from Chinese retailers.
Now I have some very cute shoes that are unusable.
Well, I am clueless if something is missing or not since I have nothing to compare with.
Bill
Ddaddy
Just doing what I do
I forgot to mention that I created those images so I could make holiday cards for my wife and daughter. They printed nicely.
-
