I've been looking at the process for printing a new overlay for an instrument bezel on one of my cars. Sign vinyl and diffusers are on the mats list.
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Dang if you had tried for a chevy you could have gotten 3 or 4.
Hey its fun to learn, especially about something you like.
Ddaddy
Just doing what I do
Who me?
Ddaddy
Just doing what I do
Never mind, it’s the ignored one.
Naw, the one movin that shed around.
Ddaddy
Just doing what I do
If you need any tips, just let me know.
dukeboy440
Well-Known Member
Yeah, started about 730, cutting trees and clearing brush. Hoping to start on our new house this spring so I’ve got a lot of work to do
I got lots of trees and brush I need cleared and I don't last 15 minutes doin that kinda work. Come on down. lol
dukeboy440
Well-Known Member
Lol. I had a slave driver, aka the wife. That said. The tractor helped a ton.
dukeboy440
Well-Known Member
I’ve got 5-6 big Beech trees to cut down. All 4+ feet in diameter
MomsDuster
Well-Known Member
For the record your help has been extremely valuable to me and greatly appreciated!Man. Sometimes I wonder why I even try to help people.
Glad to have been some help. Just the past few days has had some doozies. Most I didn't much time into. The one this evening just took the cake.
I'll leave it to YR or RRR if either is so inclined.
Did you see it ?
Timing mark is correct on both sides.
This might be the best bet for a instrument panel shipping box.
U-Haul: Lamp Box
Easing than cutting down a glass shipping box which is my current alternative.
U-Haul: Lamp Box
Easing than cutting down a glass shipping box which is my current alternative.
MomsDuster
Well-Known Member
Yeah I saw it. Sometimes I enjoy sitting back and watching the show
I’m here to learn, and sometimes share what little I do know. Seems like some folks have all the answers. Not sure why they even ask?
I’m here to learn, and sometimes share what little I do know. Seems like some folks have all the answers. Not sure why they even ask?
Its funny. I thought I could basically copy and paste an old post of mine, but then it kindof got away from me. LOL.Yeah I saw it. Sometimes I enjoy sitting back and watching the show
I’m here to learn, and sometimes share what little I do know. Seems like some folks have all the answers. Not sure why they even ask?
67Dart273 cracked me up with today's version of "we're not mind readers, tell us what you're working on!"
dukeboy440
Well-Known Member
Man. Sometimes I wonder why I even try to help people.
I’ll echo what Mark says! Even though it may appear as if I’m not heeding said advice, 9/10 times, I actually am. My posts sometimes are more me trying to wrap my mind around electrical stuff than they are me not following posted advice.
By the way. Nice job cutting that shell off the spark plug. lathe or cutoff wheel?Yeah I saw it. Sometimes I enjoy sitting back and watching the show
I’m here to learn, and sometimes share what little I do know. Seems like some folks have all the answers. Not sure why they even ask?
MomsDuster
Well-Known Member
Cut off wheel, another tip from this site I picked up on.
dukeboy440
Well-Known Member
Just thinking out loud here, but is it possible that when the cam was installed, it was missing the dowel pin to align the gears and it’s slipping on the cam? Doesn’t solve the two timing marks thing though
Ddaddy
Just doing what I do
It isn’t hard to figure out. He’s working on the car in his Avitar and profile. Sometimes, just being a little more perceptive can work wonders.
Think through it, he is trying to put the wire gang between the column mounts and the cluster. It won’t work. It has to be routed from outside them.
It honestly isn’t that hard to understand the issue and give reasonable advice.
MomsDuster
Well-Known Member
Time for me to call it a night. Later folks.
Man another slow evening.
-
