Stop in for a cup of coffee

-
E34542F5-0C10-4171-B9D3-2D8EFF6F47D4.jpeg
Somebody wants to go out
 
That's odd. He's usually on it. Is that something he doesn't currently make?
Exactly.
I thought maybe I wasn't being clear. I've tried to make every e-mail simpler. Just wanted to buy the one panel circled and some yellow fiberglass batting. Usually he's OK with requests like that.
Only thing he has been clear about is that he doesn't make the premium version (shown here) because building up the felt paper to like the originals takes too much labor,
upload_2020-3-17_11-25-52.png
 
Exactly.
I thought maybe I wasn't being clear. I've tried to make every e-mail simpler. Just wanted to buy the one panel circled and some yellow fiberglass batting. Usually he's OK with requests like that.
Only thing he has been clear about is that he doesn't make the premium version (shown here) because building up the felt paper to like the originals takes too much labor,
View attachment 1715488475
If it's something he carries, but does not make - I'm sure he is not going to break up a set.... That's one of the few things I did not get for mine. I did buy a roll of material from him for the firewall. Gray fiber stuff with foil on one side. Painted it black...
I did get one piece from him pre-cut. Not sure if it was in the body paint set or heater box kit... I believe one of them had the precut piece for behind the heater box.
 
Last edited:
Boss sent us home until further notice. Told us to be available if he needs us. So looks like I’ll be cleaning up the garage and maybe grab some material to play around with some interior ideas I’ve had for the back seat delete. I’m no interior guy so we’ll see how that goes.
 
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ Noisy or leaking? Acura parts or aftermarket?
Same one I put a hose on last month. Im sure he ran it too long while leaking. Pump will not shut up...Whrrr, Whrrr, Whrrrr. Yup costs him Mo Money :thumbsup:
 
Last edited:
Boss sent us home until further notice. Told us to be available if he needs us. So looks like I’ll be cleaning up the garage and maybe grab some material to play around with some interior ideas I’ve had for the back seat delete. I’m no interior guy so we’ll see how that goes.
Meeee tooooo,

Now if I can muster the will power to turn the puter off, I might get something done
 
Meeee tooooo,

Now if I can muster the will power to turn the puter off, I might get something done
Thought you left us.
Leafing through the factory assembly drawings I noticed the illustration of the starter installation confirms what we thought.
Lower stud, then starter, then hanger for a/t cooler lines, washer and nut.
 
Thought you left us.
Leafing through the factory assembly drawings I noticed the illustration of the starter installation confirms what we thought.
Lower stud, then starter, then hanger for a/t cooler lines, washer and nut.
I've been working with "Malibu jack" and "Henry Ford"

Got the mustang done and out and now I'm working on an F -1 fiddy.

Also getting some stuff done on the duster
 
Went for a walk. 5000 steps. Now time to start some laundry.
 
I'm finding that working on any vehicle with another person in the shop working along side, is driving me nuts.

I would much rather work alone, because I turn my music on and get lost in my own world.

I don't like to be quizzed about about the work I'm doing or about my personal life. It's like ..... just shut up and let me do my thing....
 
@Mattax
Did a little research...
From 75 FSM. Here are the wires going through grommets. What is really strange - in 74 book the blower and compressor switch are same as pictured here, but the oil and temp go through the bulkhead. Then in 75 they take 2 wires out of the bulkhead and through a grommet. In 76 FSM, they are all in the bulkhead connector.

E43C13F2-7E93-448E-A853-2902F94EABF4.jpeg


C9960612-646F-4F9F-B437-65FFAC6CC0E5.jpeg


2AF2B218-CCC4-47A5-A68A-B0344F3AB171.jpeg
 
I did find a big problem while under the hood... Shift link ready to fall off. :eek:
I thought I changed the little snap in grommet thingies when I put it together, but maybe not. Looks like that is all that keeps it in there?

4BEFD076-3504-41BB-92E5-5497136E7413.jpeg
 
-
Back
Top