Stop in for a cup of coffee

-
Mattax said:
Looks like I may be back to my plan A.
Click to expand...
We had this on the wall in our office (along with many others...)
Always one of my favorites. Our version might have had 'B' written on it - adding a jaded view of backup plans...
toshelter.com%2Fimg-get%2FI0000wHxJ4ucL5XI%2Fs%2F900%2F720%2FCrime-Cartoons-Punch-1980-04-23-598.jpg

Punch April 1980
 
Last edited:
I decided today to apply my knowlege to help expedite the correction of my vision. I applied concentrated UV exposure to my left eye in controlled bursts.

I stared 30* offset from the sun with only my left eye wide open for 10 minutes each time. I repeated 3 times with an hour between each exposure.

I figure if the virus is in there, the UV will put a serious hurting on it.

I can’t tell for sure yet, but it seems like the vision in that eye has improved a fair bit.

Tomorrow will tell and if so, I will repeat again.

Virus be damned...
 
Howdy all.
Got the parts for the 360 magnum ordered.
Also worked on the fastback today. Pretty happy with my progress. *disclaimer, all people with an illness to seeing non mopar pictures skip this post. My hands and wrists are killing me after this round.

20200413_105617.jpg


20200413_135138.jpg


20200413_135721.jpg


20200413_184255.jpg


20200413_184302.jpg
 
I have had the parts for a year but getting enough time was the issue. I worked on the Dart the other day to fill in till I had rain free forcast.
 
Well its dark and even cold outside so I'm retireing to the tent for the night. Blessings and keep safe.
 
Stephen Hotz said:
Howdy all.
Got the parts for the 360 magnum ordered.
Also worked on the fastback today. Pretty happy with my progress. *disclaimer, all people with an illness to seeing non mopar pictures skip this post. My hands and wrists are killing me after this round.

View attachment 1715507398

View attachment 1715507399

View attachment 1715507400

View attachment 1715507401

View attachment 1715507402
Click to expand...
At least you can buy new sheet metal! Mopar? No way to get that part new....
 
Ok, I havent been on here much....any update on Mopars in the Park being still on or cancelled?
 
Tooljunkie said:
Nice work on the tunnel too. Lots of work in that piece alone!
Click to expand...
Thanks, in the end there just was not any way to gracefully modify the existing tunnel to fit the T-60. The thing is huge. While I was super hesitant to cut the whole tunnel out and related firewall juncture in the end it was the right move for me. I would not suggest it for the faint hearted tho! It really made it all look cleaner and less farmeneered!
 
Morning!
Another cold day.
It’s the middle of april for cryin out loud!!
 
Mattax said:
I just emailed Hoppy if he needed it since he sent me some parts. If he doesn't its yours.
2 1/2" connection to the dash vent, no latch.
2 1/4" inside for the heater box, with latch.
Same dimensions as my 67 but lenght I think is too short for the driver side vent.
Also hose is a rubberized fabric. My original hoses are some sort of paper product.
Click to expand...
Just like what I put in mine last fall. They don't repo the paper style and the old ones look like crap.
 
Today i will finish shock mounts, drain/ refill transmission and maybe go for a putt down driveway.
Then i have to find my spare diff cover.
Plan is to clean up my best cover, and destroy my bad cover. Then weld chunks of blowed up diff to it. Bolt it over the old cover.
 
Sublime one said:
Agreed, it never got above freezing yesterday and snowed off and on all day. We are right at 18 degrees F here. I am done with Winter!
Click to expand...
I'll never understand how someone lives in a place like that. Over a lifetime it has to be extremely hard on the body.
 
You must log in or register to reply here.
-

Back
Top