Got back onto 51 merc with valve issue. 5 foot pry bar to get the guide out of the block. Shined it up and re-installed it with clip in correct spot. Now clean up and install cyl head.
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
From 67 to 73 all plymouth and demon A bodies were 108 in. Wheelbase
67 to 73 all dodge a bodies and scamp were 111 in. Wheelbase
regardless of 2 or 4 door.
In 74 all plymouth a bodies were 111 in. Wheelbase like dodge because starting in 74 the valiant used the same body as the dart.
dukeboy440
Well-Known Member
Yes, it’s in the rear floorboard
Unconventional
Well-Known Member
I don't know what GM gets for their crate BBs, but Blue Print shows an attractive 496 at what looks like a decent price.
dukeboy440
Well-Known Member
Blue prints engines are very fairly priced. Just enough to make finding an engine shop and going thru all that drama not so appealing. Cost isn’t that far apart. If they’d only offer RBs , I’d been tempted to look at them. But they don’t due to not enough quantity of useable blocks.
If it wasnt for shipping i would be messaging Johnny Mac. mind you, the engine i posted would be coming from the west coast.
Unconventional
Well-Known Member
dukeboy440
Well-Known Member
Yep. Been asking them for years. If they could offer an RB under 10-15 grand, they’d sell like hot cakes.Ya made me lookI had never noticed there were no BB Mopars in the catalog.
Unconventional
Well-Known Member
The freight from Nebraska should be less than from the left Coast. Wait a minute, that would be a reasonable assumption and reason seems to have no place in current civilization.
Starting at $6789.
Not sure what hes planning yet. He never told me the price.
There is a reputable builder that a few members in the local car club have used. Going to hit him up too.
Not sure what hes planning yet. He never told me the price.
There is a reputable builder that a few members in the local car club have used. Going to hit him up too.
Unconventional
Well-Known Member
My old work mate got a new Rodeck block for his dragster for $200
His son worked for Rodeck and they had a block headed for recycle because the distributor hole was slightly out of place 
. John Rodeck told them they could have it free if they paid to have it done properly. 
You make a few bucks every time...Yep
Guess I will be loading my car with junk again... LOL
Good Morning
You could ship that engine to me and I could haul it to Carlisle for nothing if that would help @Tooljunkie .
zkx14
Duster De-ruster
Yup.
Some of the higher $ stuff I bought for even more and didn’t use. But I did good from that stripper car. The ‘good’ stuff is getting thin now. Maybe I need to buy a parts car. LOL.
Me too!!! I love low optioned cars like my 68 valiantStripper??? I like strippers....
How you doing Rainy? Been missing your wit in the coffee house....Me too!!! I love low optioned cars like my 68 valiant
Just hanging out and spending too much money.
Bought some more cars this year and everyone keeps telling me to stop buying mopar projects but I don't have a problem, I can stop anytime
Lol. I have a 66 dart completed. A 67 440 powered dart 95 percent completed. A 66 Satellite convertible no where near completed. It is a healthy hobby.
If you have the desire and the funds who cares?
Beats being a crackwhore LOL I work with too many of those and i often think they really could use a better hobby LOL
I am a protector of cars, if we don't save them, they are going squish and probably to china.
It's our duty to put them somewhere safe and prevent that.
zkx14
Duster De-ruster
I think it has. Actually dropped 10cents for 87 this week
- Joined
- Mar 17, 2018
- Messages
- 14,814
- Reaction score
- 34,638
As the circle of chairs close, the coffee pot gently purring in the background, cookies all in a row. The large Blue stylized M dominates the room. We hear in a soft strong voice those famous words, “ Hi my name is Rainy” Hi Rainy!
The savings on a federal tax holiday, won't even be enough to buy you a happy meal.
There is no help on the way.
-
