Stop in for a cup of coffee

-
memike said:
This was my breakfast this morning, yes, at my age and most here it is time to think about it and eat better. This no cook day for me, I could not make myself eat eggs again this morning :(.... I miss my bread but it has taken a full size off mt pants, my doc was right about bread :thumbsup:

View attachment 1714933816
Click to expand...
Yup, Id eat that. Love me some Fruit. To go with all the Grease.
 
halifaxhops said:
225 75 15 I believe, and I do have a rubbing issue in a hard turn, have not really looked into it yet but think it is the poly strut rod bushings I put in are bringing the LCA forward.
Click to expand...
What is contacting. Sidewall, tread? different brands vary, but from what I see that tire is probably close in width to mine but over 2 inches taller. so more than an inch + on radius.
Did you change your gear for speedometer? At what point do you need to do that? I would need to get better measurements, but I guestimate mine will run speedo will be under what it was with 195/75/14 by a couple mph. of course that is not the correct tire either. lol
 
360DartGT66 said:
So the question is what HP I might have ...

I wouldn't want to spend close to $400 to shorten a shaft that might crap out on me, even if it lasts five years before it does.

A warm 360, what does it make? 0.030" over, standard stroke, 9,8:1 comp, 238*@0.050/0.474" lift/110LSA, 974 heads (flow 208 cfm @ 0.500" lift), 750 Carter, LD340 (I might get one), Mopar Performance valve covers, perhaps headers in a year or so.

Anyone with Desktop Dyno?
Click to expand...
5 hp lol
 
That reminds me, there's a few strips of bacon in the pack that need to be cooked and eaten!

This morning I saw two cardinal chicks have hatched. The nest is right outside the window where I sit looking at the computer. The mom wasn't there and I was worried. I watched the two open their beaks and just then the dad came by and fed them. So I guess all is well.
 
zkx14 said:
What is contacting. Sidewall, tread? different brands vary, but from what I see that tire is probably close in width to mine but over 2 inches taller. so more than an inch + on radius.
Did you change your gear for speedometer? At what point do you need to do that? I would need to get better measurements, but I guestimate mine will run speedo will be under what it was with 195/75/14 by a couple mph. of course that is not the correct tire either. lol
Click to expand...

I am pretty sure it is the poly strut rod bushings doing it, pass side tire seems more forward and rubs on the tread in a hard turn. Spedo gear I had to change to a 33tooth. Just measure your tires and gear ratio and use a chart on line tells you what you need. That's with the 323 gears sure I have to change it when the new gears go in still on the fence of 3.55 or 3.73 have both.
 
goldfish65 said:
That reminds me, there's a few strips of bacon in the pack that need to be cooked and eaten!

This morning I saw two cardinal chicks have hatched. The nest is right outside the window where I sit looking at the computer. The mom wasn't there and I was worried. I watched the two open their beaks and just then the dad came by and fed them. So I guess all is well.
Click to expand...
I hope they make ot to there first flight David, I see these are moving around here eating poison snakes and baby squirrels in this picture

Snake 2015 3.jpg
 
I hope so too, Mike, I'll see because there are literally right outside. I think it makes them nervous seeing me so close. Now the mom is feeding them. Mom and dad take turns, looks like.
 
ScampMike said:
me be thinking about lunch already! that's good to hear - what exactly happened? where was she shot?
Click to expand...
Four guys went on a holdup spree about 8:30 PM tues. They hit 6 places including a Chilies Restaraunt where I frequent. My friend Jenna, about 5ft tall and less then 110 lbs, tiny, was the Bar tender/ Manager and they came in with a gun, stuck it in her face and demanded the money. She told me she was pissed, but she complied. As they were leaving, one of them shot out the surveillance camera and It seems she got shot in the process. Bullet nicked an artery in her neck, but the sheriffs station is only three blocks from there, so she got help right away. I talked to her in the hospital yesterday. The Bad guys got caught a little while later.
 
Mopar Tim said:
Four guys went on a holdup spree about 8:30 PM tues. They hit 6 places including a Chilies Restaraunt where I frequent. My friend Jenna, about 5ft tall and less then 110 lbs, tiny, was the Bar tender/ Manager and they came in with a gun, stuck it in her face and demanded the money. She told me she was pissed, but she complied. As they were leaving, one of them shot out the surveillance camera and It seems she got shot in the process. Bullet nicked an artery in her neck, but the sheriffs station is only three blocks from there, so she got help right away. I talked to her in the hospital yesterday. The Bad guys got caught a little while later.
Click to expand...
can i guess who they were?
 
zkx14 said:
Coiled is 'soft' copper. It will flex, but not really intend for repeat movement. also, trans lines are closer to the mounts, so less movement. Still might be ok. I'd suggest leaving a loop in it, but he's trying to minimize...
Click to expand...
I'll probably use hose on both ends.
 
You must log in or register to reply here.
-

Back
Top