Stop in for a cup of coffee

[zkx14]

Done my 'workout' for today. Continuing to clear dirt from big stump and wheelbarrow it down to level up where I removed 2 spruce. Also dumping some of the rockiest stuff along the creek edge. Couple feet of my corner got eroded away, but neighbor put in the outlet pipe several years ago and I have slowly built it back up. It was washed out almost to the fence post at one time. It's the neighbors fence, but as near as I can tell without a survey it is a foot or more into my property. Not a big deal as it is all in an area nobody can do anything with anyway. They had horses and goats back there at different times

 

[zkx14]

Wrapped that up just in time. Pouring buckets now.

 

[halifaxhops]

I think you're in trouble Ray. When I brought your name up for prayer at Church, all the lights in the building dimmed. Kkkkkkkkkk

As usual!

 

[No name needed]

Did it come from a tree or a smaller plant? Looks a lot like a chestnut.

Tree

 

[No name needed]

Pouring here .
I did manage to get the store bought frozen Pizza off the grill safely.

 

[zkx14]

Pouring here .
I did manage to get the store bought frozen Pizza off the grill safely.

View attachment 1716140027

Something fishy about that

 

[zkx14]

Chestnuts look like that before they started to dry out and break open.

 

[No name needed]

Something fishy about that

Well its not Pizza without Anchovies to me. It started out as a Califlour, Margareta frozen. Ten minutes freezer to the table by way of the BBQ grill

 

[WV64Signet]

Feels good to be actually putting things together instead of taking apart.

Steering gear and shaft installed with the new coupler I picked up at Carlisle. New gaskets on the firewall. Plugged up the new wiring harness and just generally routed it.

 

[toolmanmike]

Feels good to be actually putting things together instead of taking apart.

Steering gear and shaft installed with the new coupler I picked up at Carlisle. New gaskets on the firewall. Plugged up the new wiring harness and just generally routed it.

View attachment 1716140085

View attachment 1716140086

View attachment 1716140087

View attachment 1716140088

No lower column seal/bushing? Steering COlumn Seal 1962-66 A/B-Body, Steering Column Parts, 132-2266738 Reproduction, NOS and Used Mopar Muscle Car Parts

 

[WV64Signet]

No lower column seal/bushing? Steering COlumn Seal 1962-66 A/B-Body, Steering Column Parts, 132-2266738 Reproduction, NOS and Used Mopar Muscle Car Parts

Is that what is supposed to be at the end of the column? There's never been anything there

 

[MOPARMITCH]

Is that what is supposed to be at the end of the column? There's never been anything there

The original probably fell out.........

 

[MOPARMITCH]

There is supposed to be a little BS plastic bearing/ bushing that presses into the end of that housing

 

[toolmanmike]

Yep, You will be suprised how quiet and cool it will be in the driver's seat. Lot of heat goes up that tube.

 

[WV64Signet]

Yep, You will be suprised how quiet and cool it will be in the driver's seat. Lot of heat goes up that tube.

I'm usually driving without a roof...

But that makes sense given the proximity to the exhaust manifold in particular.

 

[toolmanmike]

I'm usually driving without a roof...

But that makes sense given the proximity to the exhaust manifold in particular.

It is a nice improvement.

 

[WV64Signet]

No lower column seal/bushing? Steering COlumn Seal 1962-66 A/B-Body, Steering Column Parts, 132-2266738 Reproduction, NOS and Used Mopar Muscle Car Parts

Looking at that... seems you would have to pull the coupler off to slide that on

 

[toolmanmike]

Looking at that... seems you would have to pull the coupler off to slide that on

I couldn't get the pin out so I pulled the column, wheel and the steering shaft. Installed the seal and reassembled.

 

[Tooljunkie]

Started cleaning up my barn. One stall at a time. Totally empty it, pour in some dirt, big rocks and gravel on top. Need extra storage space. For fargo parts mostly.

 

[Tooljunkie]

Went for a ride, to pick up a set of manuals for 1976 chrysler plymouth dodge. $20.
Next town, 20 minute drive.
Local attraction there is a

thats been there for 24 years. And i finally went to see it.

 

[zkx14]

Well its not Pizza without Anchovies to me. It started out as a Califlour, Margareta frozen. Ten minutes freezer to the table by way of the BBQ grill

not my thing, but enjoy!

 

[zkx14]

Went for a ride, to pick up a set of manuals for 1976 chrysler plymouth dodge. $20.
Next town, 20 minute drive.
Local attraction there is a

View attachment 1716140100thats been there for 24 years. And i finally went to see it.

No pic with you in the middle?

 

[WV64Signet]

I couldn't get the pin out so I pulled the column, wheel and the steering shaft. Installed the seal and reassembled.

Ugh...

 

[ZMan67S]

All play here today. We went and played nine this morning.
Before we played at the range Cheryl saw a left foot lift I was doing.
I fixed that, hit the old driver and didn't miss a fairway.
Took the GD back to the range this afternoon. She hit balls and then played three holes.
I took the new driver and with the lift fix was hitting it straight again. A plus!!
A good day and an even better evening with a toddy in hand...enjoy!!

 

[toolmanmike]

All play here today. We went and played nine this morning.
Before we played at the range Cheryl saw a left foot lift I was doing.
I fixed that, hit the old driver and didn't miss a fairway.
Took the GD back to the range this afternoon. She hit balls and then played three holes.
I took the new driver and with the lift fix was hitting it straight again. A plus!!
A good day and an even better evening with a toddy in hand...enjoy!!

Cheers!