Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
I don't think i will ever do the hemi thing and i'm ok with it.... watching rick seaman videos building them and talking bout rockers being 5k a set (for decent ones) and ****.. it's just crazy
- Joined
- Mar 17, 2018
- Messages
- 14,789
- Reaction score
- 34,539
You da man.
Eddie's dart after we rebuilt it and a little tuning... Can break the tires loose from idle by just stomping on the gas...
It kicked his brother's 69 Road Runner 383 4 speed's ***...
I got to see that done live at the fox theater in detroit here... we trashed the place. sooo much toast and toilet paper.... all for janet... THAT SLUT!
the guy playing frankenfurter had to stop to tell the audience to stop..people were frisbeeing toast on the stage 
A full day when you get to rub one out.
Well, I was just so very close to getting the emergency brakes done. Dammed if I can't get the cable to reach. I'm about 2 inches short and for the life of me I can't figure out where to make it up.
Did a rebuild kit on the rear drums while I had it apart to put the new cable in
The e brake is a kit from inline Tube.
Did a rebuild kit on the rear drums while I had it apart to put the new cable in
The e brake is a kit from inline Tube.
That happened to a coworker of mine. A few years after she started teaching she had a class party. The kids were asked to bring in baked goods to share with the class. One child brought in brownies. She had no idea the child baked them with pot. They had to call a lot of parents that day after they realized the class was high
I thought I was using Oregano....honest!
abdywgn
dismantler
setting looks a little early for Pink Floyd. maybe Iron Butterfly ina-gadda-da-vida?
in the garden of Eden baby.....
Unconventional
Well-Known Member
Weather guessers were semi-correct, it rained for about 2 minutes, not even enough to be measured
Forgot to share these photos.
Gave my good friend a key tag and its on his motorcycle key. They went on a good tour late this summer.
Gave my good friend a key tag and its on his motorcycle key. They went on a good tour late this summer.
Mustang once over, needs a lot, toploader shifter,$1,000.engine bay wiring? Exhaust,pull engine and replace core plugs. Needs a carb. All the brakes,lines and drums and rotors. Radius arm is missing. Gas tank is bad.
So big decision was made,crown vic 4.6L transplant. And i know a guy who has one that is done.
Found a lincoln mkvIII donor for cheap.
So big decision was made,crown vic 4.6L transplant. And i know a guy who has one that is done.
Found a lincoln mkvIII donor for cheap.
I fired up my tablet and this is the post I saw. Page 22061,. Wow what a slow pos this thing is!!
And for the members under 40
1978 Dodge Aspen Station wagon
1978 Dodge Aspen station wagon. Been sitting for 20 years, was a family car for decades, i bought it from a guy who learned to drive in it. Not running, but will certainly run, low miles slant six is...
www.facebook.com
Good morning
Morning Steph. Check your PM's
Kendog 170
Let the boy go !
I've read about them years back but never hear people talking about them or have them on their 440.
https://www.hotrod.com/features/elephantiasis-september-1988-982-1398-64-1/
Last edited:
I can't see the ebrake arm in that pic.. but that cable looks way more back than where mine is connected to the arm...
Looks like the arm is all the way pulled. Speaking of pulled how's the rubbing outgoing?
Did the decklid last night... didn't come out great.. i might do it again. That old paint is tough as hell. I need a new pad though, the paint i put on the lower quarters has never quite cured so it gummed up the pad and it's not working for ****.. gonna order one today..
Is it hooked to the intermediate cable? Seen those to short in the past. Should have gone with @mobileparts
I'll see if I can get a more clear photo of that this morning. At this point, squeaking out the last bit I need to get the cable connected would have everything at a high state of tension, which doesn't seem correct.
-
