If I reversed the mount the center doesn't seem to change, I have the motor mounts on corect.The ears of the motor mounts are supposed to be to the rear of the ears for the engine...
It also looks like you have the trans member reversed, try turning it around...
View attachment 1715111370
View attachment 1715111371
If I reversed the mount the center doesn't seem to change, I have the motor mounts on corect.
the mount is the same mount I pulled off the transmission and it bolted on the 72 fine.Maybe try turning the rubber mount around around? If I recall the screw is off centered. I had to flip mine around to get the threads to line up with the hole in my member. Just a thought?
Pat
It's the factory mount was in fine shape so I figured no reason to change itHasn't been so long since a very similar thread. Turned out that his new trans mount was the wrong part.
I had the left and right side switched. Everything bolts right up now!All the tail shafts are the same on 904 car transmissions. Are you certain the motor mounts are on correctly like in Karl's picture? If they're not it'll pull the engine forward throwing off the trans mount position