pishta
I know I'm right....
I think you got something there. LKQ does sell used parts to shops, This was probably what was left when all high value things were picked off. Not the first time this has happened to me.
What Are You Doing To/With Your Car Today?
- Thread starter MobileCustoms
- Start date
-
I think you got something there. LKQ does sell used parts to shops, This was probably what was left when all high value things were picked off. Not the first time this has happened to me.
Cal Tonsley
Well-Known Member
Gave my car the gift of sight!
Mysons68dart
Well-Known Member
Still cleaning
Dartfreak75
Restore it, Dont part it!
I got alot done today got the rearend in the car. The front suspension and steering all hooked up and painted the dash and got it back in the car
zigs
Well-Known Member
Just finished installing auto floor shift. Mocking up seats for seat instillation.
1
diymirage
HP@idle > hondaHP@redline
got the fuel sending unit replaced
added a 3/8th fuel line
converted the stock fuel line to a return
also picked up a new transmission mount, but im saving that project for later
anyone know the best place to put the jack when replacing that mount?
added a 3/8th fuel line
converted the stock fuel line to a return
also picked up a new transmission mount, but im saving that project for later
anyone know the best place to put the jack when replacing that mount?
zigs
Well-Known Member
What do you think these seats are from. Dart Sport maybe ? I don't believe there Duster , not "70" Duster anyway.
Mopar-Mitch
Well-Known Member
I believe they are 75 or 76 duster, maybe volare or aspen, do they have storage pouches on the back?
SLOPAR72
Well-Known Member
I made some moves that needed to happen. I sold my 512 to adjust where I am at in life.... All good and if we want to visit something more serious than what I have now in the fall I will revisit that whole scenario......
Bought this 360 with X heads. It can drop in as is but better safe than sorry. Verify a few things, make a cam change (small solid) and in she goes lol.....
JW
Bought this 360 with X heads. It can drop in as is but better safe than sorry. Verify a few things, make a cam change (small solid) and in she goes lol.....
JW
zigs
Well-Known Member
Yes they do . You get the prize
zigs
Well-Known Member
Ok with the storage pouch what do you think
Mopar-Mitch
Well-Known Member
Mopar-Mitch
Well-Known Member
Here's another picture.
Just put a piece of wood under the pan and floor jack ...jack it up just enough to hold it and unbolt the crossmember. ...the whole job should take about 20 minutes.
Jeff
Removed Chinese Harmonic Damper and going to install a new Fluidamper instead.
Plus I'm getting my garage organized somewhat.
Plus I'm getting my garage organized somewhat.
MileHighDart
Well-Known Member
Been doing a lot more work on my semi-custom dual snorkel air cleaner.
Finished up the body work, did a little sanding, and painting. Looking good, but I'm not sure I'm in love with the color choices I made.
I used this Quarts gray metallic for the lid that I had left over from painting my console top plate. Then used a bright silver metallic for the housing. (the silver isn't cleared yet).
But on the engine, the gray just kind looks out of place. Isn't anything else in the engine bay that color. Wondering if I should have just made the lid black.
I did order some 5.9L Magnum decals off the web, (5.9L is red, Magnum is black) not sure what the placement of the decals will be. Have to wait till they get here and experiment a bit.
Finished up the body work, did a little sanding, and painting. Looking good, but I'm not sure I'm in love with the color choices I made.
I used this Quarts gray metallic for the lid that I had left over from painting my console top plate. Then used a bright silver metallic for the housing. (the silver isn't cleared yet).
But on the engine, the gray just kind looks out of place. Isn't anything else in the engine bay that color. Wondering if I should have just made the lid black.
I did order some 5.9L Magnum decals off the web, (5.9L is red, Magnum is black) not sure what the placement of the decals will be. Have to wait till they get here and experiment a bit.
72Dart6pack
Harder Better Faster Stronger.
Powered up the car for the first time with restored wire harness. All systems work except the ash tray lighter. That's just a easy ground issue.
zigs
Well-Known Member
diymirage
HP@idle > hondaHP@redline
DartGTDan
'71 Dart GT Fan
Mopar Mitch may I suggest that you cut a 4 1/8" hole on a piece of scrap metal to test for fitment. My grommets (from DMT) are a little "sloppy".
DartGTDan
'71 Dart GT Fan
Yesterday my buddy organized a birthday celebration parade for his 2 kids celebrating their respective birthdays (Evan 8 (Sunday) & Alaina 12 (Monday)).
That's a birthday they will never forget ! Very cool !
Mopar-Mitch
Well-Known Member
Thanks! I sure will, I haven't cut them yet.
-
