Recent content by americanmuscle

  1. A

    c-body????

    now I know you guys are big a-body people, hence this is a-bodysonly.com, but I was curious if anyone knew what kind of motor mounts are required for a 1970 c-body fury III for a slant six. are they the same as a-body? I know the car did come stock with a slant six at one point, but what kind of...
  2. A

    two to four

    a freind gave me an iron 4 barrel carb and manifold, and seeings how I'm broke, I can't afford to go aluminum. I'm switching from 2 to 4 barrel. so my question is, do i have to match port the heads to put the thing on? it's a '73 318. thanks.
  3. A

    four barrel 318

    is there a difference between the intake port sizes of the 318 or 360?
  4. A

    Band adjustment ?

    what do the bands do?
  5. A

    Kickdown band adjustment?

    is that the same adjustmet as the 904?
  6. A

    four barrel 318

    I'm trying to get a decent 4 barrel intake on my 318. I've got about $175. I'm putting a bigger cam in soon. I want to know if I need to get my heads match ported, but what kind of manifold would work best, and what kind of carb. hardened steel crank, bored.030, stock rods, stock 318 heads...
  7. A

    please help 225/318 swap

    the actual swap part is extremely easy, I basically built mine from a short block, and the hardest part was finding the right parts. you will need shifter linkages, as I remember finding 4 types of them and neither of them fit. I just seem to have a whole bunch of bad transmission luck.
  8. A

    front pump

    how do you adjust the front band? and what does the front band do?
  9. A

    front pump

    how hard is it to replace the front pump on a 904?
  10. A

    SS braided Flex hose

    yeah, I'd like to know what it is and where to get that too.
  11. A

    expansion tank relocation

    all I needed to know, thanks dude!
  12. A

    front trans seal

    yeah thanks.
  13. A

    front trans seal

    aside from pulling the trans, how hard is it to replace the front trans seal? don't you need to pull the 10 or so bolts inside the bell housing? or is the seal in the front?
  14. A

    expansion tank relocation

    at what height do I locate the expansion tank. I swapped radiators, and I forgot where it goes.
  15. A

    small block belt arrangement?

    I just finished mine, powersteering belt goes behind the alternator belt. I believe the only time you need a two pulley water pump pulley is if you have AC. and try to snag all your pulleys off of one engine, mixing and matching might not work. thats the only thing about mopars that confuse me...
See more
Back
Top