75 Duster slant six 3 speed on the column. Not sure if I have a A230 or A903. Every once in a while, when shifting into 1st, the transmission would sometimes grind and not go into gear, and would sometimes rarely pop out of gear. Driving recently, the trans popped out of gear more harshly than...
Got a pretty much totally complete front suspension set up with kelsey haynes discs, think it came off a '67 dart, not sure since it was a long time ago. K frame, spindles, upper/lower control arms, calipers, rotors w/lugnuts, dust shields, brake hose brackets, idler arm, strut rods, tie rods...
Hello, I have a 75 Duster with Big bolt pattern front drums that Im trying to convert to discs. I have the front suspension (spindles, upper/lower control arms, etc) from a 71 small bolt pattern Dart, is it possible to run big bolt pattern rotors/wheels on this combination of parts? let me know...
I just completed a torsion bar socket frame cap project where I took the torsion bar and its rear socket out and welded the socket back in with a new frame cap I got from Classic Industries. I put it all back together and the ride height adjustment bolt is completely different on the side I...
the speedo in my 1975 plymouth duster always worked fine, until after a recent brake line job it stopped working dead cold. I figured something got jostled around while routing a brake line through a tight spot so I traced the cable back up from the transmission and found this weird...cylinder...
I've been running a Holley 1945 on my slant six for a few years now without issue, but lately I've been having issues with surging at cruise and bogging during acceleration as well as intermittent trouble at idle. Was hoping someone on here could point me in the right direction to resolve the...