You may have to stop for gas more than everyone else but you will be in the lead all the way.
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
At every stoplight and on ramp!
There’s an app that works really well…No idea................
Gas gauge doesn't work
No speedometer
No odometer
Underside i use a good rust paint. I cheap out and go one coat. Should do 2
Which one? I have a tach, that's about it. Running Waze in MN back and forth to the show at least I had a speed to go by.
Evening folks. Just boxed up the RongAuto radiator hose to send back. Guess Amazon spoils me with free returns. This cost me 8 bucks out of my refund.
So, nerospine surgeon said my issues likely stem from C2-8. I have 2 bulged discs below there. He is ordering an EMG. Apparently they can identify the individual nerves causing issues so they can find the orientation and root cause.
Mercury Marine has a free app for boaters, but it has GPS speed as a feature. It is what me and my boy useWhich one? I have a tach, that's about it. Running Waze in MN back and forth to the show at least I had a speed to go by.
Vessel View Mobile is the name.
Wow, that's a cool thing. Keep us posted. They know what goes where. I have a bulged disk with "moderate" issues on L4-L5. No wonder why I have leg/walking/standing issues.
Ive had this one about a year now and used this one all thru power tour. Worked great even when signal strength is weakWhich one? I have a tach, that's about it. Running Waze in MN back and forth to the show at least I had a speed to go by.
You can customize the colors and font and such tooWhich one? I have a tach, that's about it. Running Waze in MN back and forth to the show at least I had a speed to go by.
Thanks Chris
I thought this polyurethane mount was going to work out, but nooooooo
Even after removing the "preload" plate from the top, it sits too high after weight is on it and the bolts are tightened.
I bolted the torque strap down so its very pre-loaded. It works but I'm not happy with it.
Even after removing the "preload" plate from the top, it sits too high after weight is on it and the bolts are tightened.
I bolted the torque strap down so its very pre-loaded. It works but I'm not happy with it.
All I wanted was transmission mount that didn't fail in 3 years. Figured polyu was more oil resistant than rubber.
Now looking for some sort of oil resistant coating for the rubber mount.
Found some expensive products in McMaster. One is a PVC coating and another is a 2 part Poly urethane.
Glad you know what you're doing Matt I'm lost on figuring it out.
Feel like I'm wasting a ton of time.
I'm going to look at the failed mount more closely to see if my theory that oil and ATF is damaging the rubber is likely on right track.
Permatex makes a spray sealer (RTV ?) that maybe would be a decent oil resistant coating.
Ideally. Yes!!!!Maybe just fix the oil leak?
The engine I got the drain plug sealed, but still have some leaking further back when running - possibly the back of the valve covers but probably the rear main seal (yea - practically new engine) grrr.
The transmission fluid I can't figure where its mostly coming from. A little at the speedo cable - which is annoying as it has new seals.
I think most is coming from where it attaches to the transfer case. I'm in no position to deal with that. And some is coming from the transfer case - but that's aft of the mount and so little.
Smiles per gallonNo idea................
Gas gauge doesn't work
No speedometer
No odometer
Hot on the Mt, but its wall to wall vendors and buyers, hope all is well with everyone this evening..92 real temp, .. mornings are our strength, get there by 7 am and leave by 2, today we got off the Mt at 12 fifteen, hotel, shower and napped for 2 hours.. I am blessed I have a scooter.
Nice pic, looks like the sh*t could hit the fan any moment there tho
I'm back from Bainbridge Island, speakers sounded great but what doesn't hooked up to a McIntosh Amp lol! Think we're going to go forward with trade/cash, he's driving the Cornwalls up here and bringing a trailer to take the Klipschorns back.
Hope that's not heading your way.
-
