Search results for query: *

What are these they were under the rear seat? 2nd pic these hoses go inside the car. washer hose??? Foot pump? And what is the small hose?

I am missing the emblem that goes at the top of the rear fold down seat “the Barracuda” I have the rear piece but I need the front fish emblem that faces front and the bolts. Attached is a pic. I also need an ashtray piece the piece with the ball bearing that holds it in.

yup,was

unfortunately we went to roll the 68 out and it became Roadkill under the right rear

G morning all, Open the garage lastnight to do a little tinkering and look who walts in. I must have jumped 3 feet in the air. He/she was about 7-8 inches

Is this wheel too small for my Barracuda? 4.5 I think I’m supposed to have 5.5 correct? I was going to use for a spare. I got a 205 60 14 brand new for 25 bucks. I’m supposed to pick up but I’m thinking it’s gonna be too wide for that 4.5

I do, but it needs refinished. I can let you know later someone was supposed to contact me today. He offered me 50 bucks and a Barracuda emblem for my right fender script.

I have some 68 Barracuda extra grill pieces they are broken. The bars on the ends of the surrounds are gone, but somebody might be able to use them or piece them together $125 shipped. Left & right surround and two right hand grilles Look over well, as is

Came a long way since june 21st

Oh it can be i’m sure its strong enough for a bit just adds more work to a resto. I just wanted to make a driver

Drivers front control arm right behind it Rust hole subframe inside scaly vacuumed out a bunch of rust.

Ok thx all

OK, so this is the reverse “passenger side “engine mount looks identical to the driver side. I have the flat one with the two threaded studs. That’s not a 340 mount? 1st pic is mine 2nd pic is of a 318 mount 3rd is what comes up for a 340

So the brakes feel good after the master. Cyl. I finally got my torsion bars, loose and lowered the front end. I also took the passenger engine mount out because the car was leaning to the passenger side.that it was wasted see pic. went to buy a new engine mount and it came in wrong. See 2nd...

So I pulled my engine mount out, and it looked like the 1st pic. I ordered one and it came in looking like the 2nd pic. We looked it up for a 5.2 318 and it comes up with the correct engine mount that’s in my car. I have the original motor by the numbers it’s a 68 340, so why do I have the wrong...

Need Pass Arm rest base Mine is missing, I need one just to make armrest work passenger side thx 68 barracuda Also need Am radio bracket to hold it secure. Thx.

thx, when i said "barracuda" emblem i meant "barracuda' emblem, LoL, sry for confusion with name of the car. So i need the barracuda script emblem.

looking for a fender barracuda emblem thx!

I know we should not comment , but why only one head rest?

I don’t have disc brakes

Too late dot 3 already down the hatch. Good to know

Great now the master cylinder is leaking in the engine compartment and down the firewall on the inside of the car so I bought myself a new one after breaking the two lines that go down to the proportioning valve, taking it out great all back together now.

This is the rear standard length and one front and 4 left hand nuts do you need an actual measurement

Huh?

Nah, Done them a few times, already knocked it out no problem. i have 4 in the front id leave it if i had too mainly the rears is missing 2

Still looking for 2 rear left hand axle studs and 1 front left hand drum brake wheel stud and 4 left hand nuts

OK, I finished all the brake lines. I have a brake pedal. Yay! I also installed the front shocks and the three brake hoses. I’m working on the tailpipes. I also found a better carburetor

Still have head rests, factory shifter, horn button and bezels make offer

Got one thx

Found one thx was local $25