Search results for query: *

I hadn't seen my old(er) lol neighbor for a while and dropped by today. He wasn't looking to good. Turns out his daughter had come to visit, was surprised at how well he was doing, then he told her he was using CBDs with great success. She fukin freaked out on him, said it was voodoo, yada yada...

All good info from A.J., and as he mentions, the illustration above is not Mopar, it's another breed . I've never seen that type of valve on a Mopar, thankfully, they're a ***** to have with line-lock, as they need to be centered everytime you use the line-lock, - to shut off the warning lite...

The extra pumping, loud noise, and bunchas of dust is crazy. I once had installed a rear wheel cyl pushrod and missed the shoe. The result was the pushrod slid beside the shoe, forcing the shoe outward against the side of the drum, when pedal applied, creating lotsa noise. Can you just check the...

Keep in mind that calipers merely relax, movement of a few thousands if not "knocked back" by a bent rotor. The difference in fluid volume between the 2 diameters is minimum. Once bled, the M/C just adds pressure to an already full system. Cheers

Please report back how it goes . Here's a site for some supplemental reading about what you are about to learn and experience. This site offers more than the retail sales section, skip that till later, but read the info sections, recipes for what you are likely going to be offered. Good luck...

Some of these are public washrooms, and leaving a harsh chemical to stew isn't really safe, with kids and all. Coke was a pleasant, safe surprise. Old dude at "janitorial" supply store suggested it .

I thought exactly the same thing, and was pleasantly surprised. Much nicer for the environment .

I usually use a breaker bar if my 1/2 impact won't do it. Are you turning the proper way ? Driver's side can be LEFT thread . If visible, end of stud should have "L" stamped in it .

That IS about $175 Can . . lol

We get a low or high toilet in a box, with EVERYTHING in the box for like $175 Can . Costco ! !

Adjust rear brakes . Mosta your pedal travel is going into moving the shoes out to the drum, adjust them up, pedal travel will reduce . Cheers

Seriously, plug it with a buncha cloths or some such, and fill as poss with . . . Coca-Cola. ( Service Station and landlord Hi-Tech) Leave it a week, top it up as nec. Works on urinals too .

It's not uncommon for a vehicle that was a heavy smoker out the exhaust, to smoke for a long while after re-ring, or bad guides, as the exhaust pipes and mufflers were full of tar/oil. Not sure how much it could a sucked with your messed up seals. Check for eternal oil leaks, drips on floor etc...

For me, it was an old funeral car, early 50s Cadillac Hearse. It ran fine during the procession out to the Burial Park,the other cars could return on the hiway, but this one overheated at speed. When brought to us, we rifled thru the glove box, found the newish looking rad was just a coupla...

Stainless welding rod, or heavy piano wire. (We had a music store down the block.)

The interesting thing about the lower hose sucking shut, - is that as soon as you let the rpms drops from the revs nec to suck it closed, it will immediately open , and stay open till next time revved, then shut. Cruise at 60 mph, it gets hot, pull over, idle, open hood, inspect for problem...

Yeah, I mentioned that in an earlier post, "vacuum" was part of the quote. Cheers

I tried to avoid the use of the word "vacuum", but I maintain low pressure area created by "centrifugal" force, and the terms "single suction, dual suction pumps" seems to support what I was taught, well before the interweb, lol

I have acreage, my driveways aren't show pieces, but worked for me, going on 20 yrs now, but it does need a "side trim". I used the "kibble" grindings they grind up from old asphalt. They screen it., very reasonable, trick is compact the **** outta it, when you think it's compacted, do it again...

"Centrifugal pumps work on the simple principle of imparting kinetic energy to the liquid. The pump consists of an impeller that is generally situated on a rotating shaft and turns inside of the pump casing[^1^]. When the impeller rotates, it creates a vacuum, sucking the fluid into the pump...

There was an extreme sense of success and satisfaction I have seldom achieved anytime else, in smashing out the windows as the squatters could only watch, mouths hung open. It was worth every penny for new modern windows .

If you dropped your car off at my shop with the stuff in the trunk, I'd pull a w/cyl apart checking for "correct " spring expander, check size, install. If the w/cyls are expander style then a redundant valve in m/c is of no consequence. If old style regular poor fitting spring in w/cyls, it...

Water pump uses centrifugal force to create a low pressure area. This is not a positive displacement pump, vanes/flukes are not sealed to the case/housing. No "pressure" as such, is created, only circulation. The lower rad hose, the return heater-hose, and by- pass hose all channel coolant...

Licence plate ?

If it were mine, I'd leave the m/c alone,(warranty) install the w/cs with the expanders. The previous post forgets the return springs returns the shoes to the "anchor", and cannot compress, or put any pressure on the hydraulics, so no delay if adjusted properly, expanders keep cup in contact...

I had a lady wanting to rent a house for a "daycare". She pleaded with me to come see where she lived now, coupla hundred miles up-island. Went , looked, she had that house all up to nec codes, showed me all the kid stuff, yard stuff, safety stuff, she would install, and extra insured it. She...

When suite is open to view for rental, never say the unit is "available", cuz legally you may bind a contract. Say there "have been several applicants whose references have to be checked" inferring there are applicants ahead/prior, - avoiding "first come/served situation". Got stung there ...

Ohhh yeah, there are folks that use/game the system. My worst were welfare, govt cheque, laws say ya gotta take em. That's why finding out who wants to move in is sooooo important. He's worked for ATT for 12 yrs, she been at Macy's for 5 yrs. Call employer to find if true. Ask employer if...

A little more efficient than my #9 iron .

For flat-rate, we'd tap whichever tab (L or R) with a hammer to allow the cyl piston to come outta the bore, check, hone, replace cups/pistons/dust boot, then pry the tab back up to retain pistons.