Search results for query: *

To the scrap pile it goes!!

:(

I meant to say that the watermark you could barely see on your original became prominent on the original after you scanned it. Like the light of the scanner activated the watermark ink or something. Just me overthinking it. No worries.

Sent pm

Depends on the LED. Some have resisters that burn off the excess wattage. Others use electronics to switch the voltage on and off in a duty cycle. Some are dimmable some are not. The 158s in most cases have lasted 50+ years but LEDs while better now might not (regardless of their claims) how...

Before you get into swapping bulbs around, figure out why your panel isn't lighting up. If the bulbs are good and it isn't working, swapping to LEDs isn't going to change a darned thing. Make sure the panel is grounded and start tracing current paths and testing components. (are you sure the...

I can’t imagine that package of parts having less than 1.900” IH. You’ll likely end up needing to shim to get there.

I could do it. Pm me if interested.

You have to be careful because not every synthetic will work with these transmissions. But it can be done.

It’s also the smallest gear on the shaft. You have to apply the clutch. With a clutch like you have you don’t apply the clutch. It’s like a toggle switch. It’s either on or off. That breaks parts.

-Quick update, this year has been nothing but one hit after another hit, so I apologues for the lack of progress. I've been hurt for the last couple months with a herniated disc. We had a death in the family that pretty much shook up my year here at home as well as work, leading to a tribute...

I will need to have a 4160 style , R4368 for a 1970 Challenger restored. Any shop recommendations?

There are some numbers stamped on the front of the block just below the driver side head like C273 and a number? What is the scheduled build date on the data tag on the car? Alan

Do you have any cans for sale?

I would think with the LED’s that they wouldn’t get hotter than the standard OEM bulbs. Correct me if I’m wrong.

Do you have any mopar cans for sale?

I'm awake

When you reinstall the needle & seat assemblies lube the o rings, then screw them in deep enough that the nut barely has anything to grab... That way when you start the engine you'll know the fuel level should be low.... So, with the sight plug out and a screwdriver & 5/8 wrench you can slowly...

Sent you a pm

Price lowered $750

Mymopar.com Download your cars FSM Page 727 /728 From googling... 194 is a higher wattage version of the 158. 158 about 3.3W 194 about 3.8W Higher wattage = more current and more heat. IMHO If you can get the 158 that is what I would stick with. I have melted lenses using...

Well, laundry today, catch up on paperwork for the car club meeting tonight, clean up, pick up around the house (that never ends and I do a poor job of it) Damn, I need to pick up a gallon of milk today. I bought groceries yesterday but forgot milk. :BangHead: :BangHead: You know the drill.

I am selling a set of 1968 barracuda trunk molding. The trim has a little dents here and there they can be repaired. I tried to take the best pictures I could. If you PM me I can send you videos of them as well. Also comes with a set of new clips/bolt set from classic industries. I am willing to...

Sounds like he had a really bad day. :BangHead:

Did you confirm the motor was turning in the right direction?

If you ask around some will send you screen shots of tunes that you can add into your graphs for to start on a tune and go from there. I might even be able to have my son send you the base tune we have in the dart for everyday driving, and you can tweak from there. when you are ready for that...

That's only a couple hours away, not bad. I'm searching facebook market for an engine. Likely a short-block if possible, with a steel crank. I'm still researching heads, cams, and intake options so it all goes together and works well.

Thanx for the reply and the help ! Very grateful.

I have this late 60's quart of High Performance Axle Lubricant. PM me you you might be interested....

And since PIE sent those rockers there is no telling what they were for other than to pawn off shelf stock