Search results for query: *

Will a serpentine belt system off a 1999 Magnum engine bolt up to my 1974 318 LA?

I have a 2000 Dodge Ram. My issue is at cold start i noticed when I start it it has a top end tick until the oil pressure gauge comes up. Now while driving it today the pressure dropped to 0. Then I shut it off for a few seconds and the pressure is back up to 50. Then after a few miles the...

Where are you guys mounting your filter when using a relocation kit? What type of oil pump are you using. I mounted mine high up on the inner fender.After 20 miles my oil pressure went to 5-7 psi. Do you think it was to much for my stock pump? Should it be mounted lower with a high volume...

This may be why........

I have a 71 Duster and I am dropping in a 318 and a 26'' radiator.Does anyone know how long of a fan spacer I need? Trying to figure out the size before I install the engine.I am guessing maybe a 2 inch?

Does anyone have a picture of a 318 or any other LA with a single groove can pulley.Which runs off the bottom crank pulley the fan or alternator? Or both?Trying to figure out the belt system on a 74 318.I have had big blocks for the last 15 years sorry....LOL

I have a 318 with a Weiand Action Plus intake.I really do not see anywhere to mount the coil on the intake.I do not want to mount the coil on the firewall.So where are you Guys mounting your coils?

I have a 74 318.It has tiny threaded holes under each exhaust port.What are these for and do I need to block them off if my headers do not cover them?

I do not see the torque value for the oil pump bolts to the block in my Chilton's.Engine is a 73 318 .I did find one web site that gave a torque value of 35 ft lbs.Does 35 ft lbs sound right? Thanks,Jim

Anyone have a good source for reman 360 heads?I am not sure if I can swing the cost but I would like a set of 360 heads to bolt on my 318.I have heard issues with the 302 heads cracking.Why do they crack? Casting issues,heating issues? Thanks,Jim

Pulling the slant and installing my 318.Is there any cheap performance things I can do to the 318 before I drop it in.I can not afford different pistons or heads right now... Here is what I have a rebuilt 1974 318 with 10,000 miles on it.Stock rebuild with Lunati 284/484 cam, double roller...

When I paint my 318 I was thinking about spraying it with my gun instead of rattle can.Has anyone on FABO used the Eastwood engine paint? If so how well has it held up? And did you use a primer under it? Eastwood Chrysler Blue High Temp Ceramic Engine Paint Quart | eBay Thanks,Jim

I have a 1984 360 4 bbl motor out of a truck.It ran when pulled what do you think it would be worth? What kind of heads would it have? Thank You,Jim

Need your suggestions for a cam,intake,carb for a motorhome 360.Engine would be going into my 71 Duster.Would like to get as much performance without touching the lower end.May add Doug's headers also.Engine has 40,000 original mile on it.

Ok which Rust O leum red have you Guys been using on your Mopars.I have heard this is some really good engine paint. There is Ford red #248948,Gloss red #248962, or Chrysler Industial red 248956.I think the darker Industrial would look better.I have even kicked around painting my engine...

I have a few questions for you Guys who have built a 318/390.Is a 1974 block good enough?Any modificatinons need to be done to the block?What heads are you guys running?What cam,carb,and intake are you running?What kind of horse power are you Guys getting?I am thinking about building one for my...

Are you Guys using Ford red or Chrysler Industrial red on your small blocks? Jim

I just bought a 1974 rebuilt 318 and was wondering how can you tell if it is a steel crank or not.It looks to me to have the thinner balancer on it which makes me think its a steel crank engine.I had a 73 340 years ago that had the wider balancer on it .So I always assumed the 340 was a cast...

What oil has zinc in it now?And where can I buy it?I was going to use Shell Rotella,but I heard it no longer has the zinc.I just built a fresh motor.I have the cam broke in and have no miles on it yet.My Com Cams directions say you don't have to run zinc oil after the cam is broke in.I thought...